Contact
QR code for the current URL

Story Box-ID: 99848

VIPA Gesellschaft für Visualisierung und Prozeßautomatisierung mbH Ohmstraße 4 91074 Herzogenaurach, Germany http://www.vipa.de
Contact Ms Yvonne Köhler +49 9132 744129
Company logo of VIPA Gesellschaft für Visualisierung und Prozeßautomatisierung mbH
VIPA Gesellschaft für Visualisierung und Prozeßautomatisierung mbH

The fastest Hard-PLC worldwide with integrated Ethernet-CP 343

Ethernet communication via speed bus

(PresseBox) (Herzogenaurach, )
The new SPEED7-CPU from VIPA is worldwide the fastest automation set of its kind and self-evident it is programmable with STEP7 from Siemens and adjustable to the instruction set of S7-300 or S7-400 from Siemens. This CPU is created for time-critical applications and fulfils at the same time the demands for increasing memory capacity. The memory could be dynamicly adapted additionally to the demands of the plant/application every time, without the need of exchanging the existing hardware. Thereby the number of the needed CPU types - which the customer has to insert in all applications - reduces to one.

There is a integrated High-Speed-Ethernet-CP 343 with RFC1006, S7-Communication, H1, TCP/IP, Modubus master, USS master and UDP available. This CPU is projectable with up to 16 connections (depends on CPU version).

General informations to SPEED7

The CPU with SPEED7 technology is the first PLC which is configurable via MMC (Memory Configuration Card) for a large memory area. Of course, the functions of the previous VIPA MMC, beside the scaling of the memory, are still available – e. g. as a external data memory for scources and programs as well as for the firmware updates. The standard MMC card could be used for storing of programs and data during for the running of the CPU. For the operating of the CPUs the memory card is not necessary.

Profibus is available as integrated fieldbus interface. Furthermore the VIPA MPI interface with 12Mbaud is included, which besides standard MPI-communication to PG also allows a PtP connection via Green Cable.

In addition the SPEED7-CPUs possess an integrated Ethernet-interface which offer convenient programming via network to the user.


Peripherals can be connected in two ways:

1. Serial connection as usual on the right side via S7-300-Standard Backplane Bus, at which all S7-300-I/O-modules as well as partly communication processors and function modules like counters are to be operated.

2. The special feature of CPUs 314ST/317 is the parallel connection via VIPA Highspeed parallel bus on the left side of the CPU, which offers the possibility to use special fast peripherals. For the Highspeed parallel bus VIPA is offering digital in-/ outputs, fast analog inputs, FAST Profibus-DP, INTERBUS-Master as well CAN-Interface (see relating list of VIPA).


With the integrated Master for Profibus-DP, the Ethernet-Interface and the MP²I-Interface VIPA is supporting all important interfaces in one system.

Technical Data:

CPUs: Multi-processor architecture, equipped with SPEED7-Chip of profichip GmbH
Language: STEP7 from Siemens, adjustable as compatible to Type 300- or 400-
Memory: CPU 314ST/315SB with 512kB to 2MByte configurable in steps to 128, 256 and 512kByte or
CPU 317NET with 2MByte configurable in steps to 1, 2, 4 and 8 MByte, 50% program und 50% data, no load memory necessary

Peripheral interface: Double bus architecture
1. Serial bus compatible to S7-300 from Siemens with up to 32 modules per line

2. VIPA CPU 314ST/317Sx Highspeed Parallel Bus, 32Bit,
16 slots per 64kByte address capacity. Expandable in groups to4 ports each; data transfer rate > 40 MByte per second, interrupt-capable

Times:
Commands: Bit-operations, from 15ns
Word-operations, from 15ns
Fixed point arithmetic, from 15ns
Floating point operations, from 86ns

Cycle: Standard cycle from 100µs (open-circuit operation)
User programme-runtime: 100k instructions in command-mix. typ. 2,1ms



Cycle mode adjustable:
1. Classic LSB-Mode (reading, executing, writing), Default
2. Fast-Parallel-Mode, B+SL-Mode (executing, writing + reading)
Interrupt: Prcess alarm response time from 100µs
Alert: Highspeed alert OB 29 for 500µs, OB 28 for 250µs!
runtime OBs + alter should be ≤ 50% of total performance
Interfaces Basis CPU
Interface 1: MP²I-Interface, MPI for 32 connections, 12MBaud and PtP 3964R, DSub-9
Interface 2: Profibus-DP-Master, 12MBaud for up to 126 Slaves, DSub-9, ASCII, STX/ETX, 3964R, Modbus master, Uss master
Interface 3: Ethernet-Slot for PG-communication RJ45
Interface 4: USB 2,0 Interface for entering into MPI-network, plug A (CPU317)
NET-CPU 317SN/NET
Interface 5: Ethernet CP 343, RJ45, S7-Communication, RFC1006, H1, TCP/IP, UDP, up to 16 connections


Relative CPU performance in % compared to Siemens S7-318-2-DP as reference

Hall 9, stand C17

VIPA Gesellschaft für Visualisierung und Prozeßautomatisierung mbH

VIPA was founded in 1985 in Erlangen by Mr. Wolfgang Seel as a system house for automation engineering. After the first PC-based machine operating panel there were further developments of control and communication modules. The first customers were from the automotive and food industry, conveying engineering and machine and plant construction. VIPA has been increasingly active in the European market since 1995.

The introduction of the modular automation System 200V was the basis for creating more powerful, faster and more reliable systems. In the year 2000 the new 2000sq.m headquarter in Herzogenaurach, west of Erlangen was opened.

The development of the SPEED7 High-SPEED PLC in 2003 was a further technological milestone in the automation equipment range (www.speed7.com). In 2005, VIPA has extended the product range with the Touch Panel family.

More than 100 highly qualified employees are working for VIPA in Germany. In addition to that there are VIPA branche offices and Service partners in 55 countries.

References:
- Audi AG
- BMW AG
- Bayer AG
- GEA Tuchenhagen GmbH
- Eisenmann Maschinenbau KG
- Thyssen Krupp
- Volkswagen AG

The publisher indicated in each case (see company info by clicking on image/title or company info in the right-hand column) is solely responsible for the stories above, the event or job offer shown and for the image and audio material displayed. As a rule, the publisher is also the author of the texts and the attached image, audio and information material. The use of information published here is generally free of charge for personal information and editorial processing. Please clarify any copyright issues with the stated publisher before further use. In case of publication, please send a specimen copy to service@pressebox.de.
Important note:

Systematic data storage as well as the use of even parts of this database are only permitted with the written consent of unn | UNITED NEWS NETWORK GmbH.

unn | UNITED NEWS NETWORK GmbH 2002–2024, All rights reserved

The publisher indicated in each case (see company info by clicking on image/title or company info in the right-hand column) is solely responsible for the stories above, the event or job offer shown and for the image and audio material displayed. As a rule, the publisher is also the author of the texts and the attached image, audio and information material. The use of information published here is generally free of charge for personal information and editorial processing. Please clarify any copyright issues with the stated publisher before further use. In case of publication, please send a specimen copy to service@pressebox.de.