The Bremen Cotton Exchange and the Bremen Fibre Institute e.V. together are inviting to the 36th International Cotton Conference Bremen on 29th and 30th September. Under the Slogan “Cotton Decoded”, all conference participants will be offered an ambitious programme with topical lectures and lively discussion groups on location in Bremen as well as online via a conference platform.
Cotton testing methods, fiber quality, and the impact on spinning process productivity have been at the heart of the International Cotton Conference since 1965. Experts in textile processing discuss from different perspectives.
We take a deep look into textile processes with a focus on greater efficiency and speed.
On Friday, 30th September, two sessions at the Cotton Conference will address some problem areas within textile processes and at the same time offer ideas for suitable solutions. Examples include:
Precleaning of Cotton
For Ralf Müller from the German textile machine manufacturer Trützschler, a higher cleaning performance, growing production demands and flexibility of the processing of raw materials are key topics of the spinning preparation of cotton. The removal of coarse contaminations is of particular importance here. For this purpose, Trützschler has developed a new generation of a precleaning aggregate that due to doubled production capacity leads to a reduction of energy consumption and to a significant increase of cleaning efficiency compared with the forerunners. With this, Trützschler wants to make the preliminary stage of the blow room more productive, especially because the processes could be regulated by an electronic waste control system. After all, according to Trützschler, intelligent cleaning can spare the wastage of up to 150 bales of cotton per year if it causes a maximum utilisation of raw material and a minimal loss of good fibres.
Targeted Raw Material Management Pays off
Oswald Baldischwieler from Swiss company Uster explains in his speech that in order to reach a consistent quality of cotton products like yarns and fabrics it is necessary to carry out an intensive examination of the cotton fibres in the early stages of production. Uster is a world leader in textile examination and quality control.
For Uster, targeted raw material management is important for the success of a spinning mill because it absorbs the main part of costs for the spinning mill. In most countries, the raw material cotton accounts for more than 60 percent of total yarn production costs. An optimal blending of fibres at the moment of opening the bale is prerequisite for a consistent and long-lasting yarn quality. It is crucial to keep yarn quality variations at a minimum and the quality as constant as possible in the long term. Bail management pays off.
Spinning Waste Cotton
Rieter AG, Harald Schwippl: The recycling of raw materials has been an increasing trend for several years to achieve more sustainability. In addition to the recycling of chemically or mechanically dissolved raw materials, the recycling of spinning waste is also a possibility to meet the increasing demand for raw material recycling.
For this purpose, carding or blowroom waste is processed. The study shows which adjustments are necessary in the spinning process for recycling. It also shows which spinning units and qualities are possible as a result. The raw material was used to produce a rotor yarn.
Shortening Production Processes
Yonathan Sissay from theEthiopian Textile Industry Development Institute, Addis Ababa, will report on the results of his research. It is about reducing lead times in production processes of clothing from the fabric warehouse and manufacturing to packaging and delivery. In the study, necessary and unnecessary working steps were analysed based on a cause analysis and new process flow charts for economically efficient work were defined following the Pareto principle.
Effect of Cotton Short Fiber Content on Drafting Force and its Variability in the Drafting Zone
These results are relevant for the machine setup. Within his research project, the Pakistani researcher Quaim Siddiqui found that the drafting force is the intuitive factor initiated by the dynamic frictional forces between slow moving and fast moving fibers in the drafting zone. According to Siddiqui, the fibre length is one of the most important factors influencing the drafting force and its variability. Using data from the onlinedraftometer, the scientific study analyses the interaction between the dynamic drafting force and its variability with respect to the short fiber content of carded cotton sliver.
In Advance:
Spinning and Textile Seminar: Expert meeting at the beginning of the cotton conference
On 28th September, that is on the eve of the conference, an exchange among experts will take place under the headline “Quality Requirements along the Textile Value-Added Chain”. All textile raw materials will be included here, we are thus going beyond cotton. The Bremen Fibre Institute e. V. (FIBRE), the Bremen Cotton Exchange, the Industrial Association Finishing – Yarns – Fabrics and Technical Textiles (IVGT) and the International Textiles Manufacturers Federation (ITMF) are inviting to this together.
Conference Venue
The conference venue this year is not the historic town hall, but the Chamber of Commerce in Bremen in the immediate vicinity of the Cotton Exchange. The Chamber of Commerce has been representing the interests of trade in Bremen since 1451 and is in close contact with the Bremen Cotton Exchange.
Other highlights of the anniversary week
This year´s International Cotton Conference is taking place in the anniversary year of the Bremen Cotton Exchange. The organisation was founded in 1872 and is celebrating its 150th birthday this year.
The International Cotton Conference is therefore embedded in an entire anniversary week. On the evening of September 29th, following the first day of the conference, the Bremen Cotton Exchange and the Faserinstitut Bremen invite you to the popular and well-known Bremen Cotton Night. This event is dedicated to the 150th anniversary of the Bremen Cotton Exchange and will be held at the Bremen Übersee-Museum for good reason. At the same time, the doors will open to an exhibition well worth seeing on the cultural history of cotton. The participants of the conference will be able to celebrate in the big atrium of the museum and get a tour of the exhibition in the meantime.Enjoying good music and good food, it will at last be able once again to spin personal networks and at the same time to pass in review the multi-faceted world of cotton with a beautiful and well-conceived exhibition.
Registration is underway
The starting gun for the registration has been fired: you can register at https://cottonconference-bremen.de/... from now on. You will also find regularly updated information there.
We will continually inform about the International Cotton Conference on 29 and 30 September and about the complete programme in the run-up in the form of further press releases as well as target-group-specific newsletters and also via our social media channels.
About the Bremen Cotton Exchange
• Founded in 1872 to strengthen the interests of the cotton trade and consumption in Germany, the Bremen Cotton Exchange has now been in the cotton business for 150 years. As an international court of arbitration, the Bremen Cotton Exchange always stands for neutrality.
• We offer various services to our members. Clear and neutral data and analyses are a part of this.
• As the ICA Bremen, together with the International Cotton Association in Liverpool and in cooperation with the Fibre Institute Bremen, we provide the International Quality Testing and Research Centre in Bremen. The Hanseatic city has now become the international centre for cotton testing and research, quality training and certification.
• We represent our members in all the important international bodies in the cotton world.
About the Fibre Institute Bremen e. V. (FIBRE)
• In its 66-years history, the Institute has developed from a cotton testing laboratory into a successful research institute in the fields of future-oriented fibres, technical textiles and fibre composites at the University of Bremen. It deals with basic scientific and application-oriented questions along the entire process chain from fibre production to the manufacturing of fibre composite components and more for the aircraft industry.
• FIBRE’s central international importance in cotton is shown by its work on the international harmonisation of cotton testing [e.g. round tests in cooperation with the ICAC and USDA-AMS], its work in central committees [ICAC Committee on Standardised Instrument Testing of Cotton (CSITC), ITMF Cotton Testing.
Cotton testing methods, fiber quality, and the impact on spinning process productivity have been at the heart of the International Cotton Conference since 1965. Experts in textile processing discuss from different perspectives.
We take a deep look into textile processes with a focus on greater efficiency and speed.
On Friday, 30th September, two sessions at the Cotton Conference will address some problem areas within textile processes and at the same time offer ideas for suitable solutions. Examples include:
Precleaning of Cotton
For Ralf Müller from the German textile machine manufacturer Trützschler, a higher cleaning performance, growing production demands and flexibility of the processing of raw materials are key topics of the spinning preparation of cotton. The removal of coarse contaminations is of particular importance here. For this purpose, Trützschler has developed a new generation of a precleaning aggregate that due to doubled production capacity leads to a reduction of energy consumption and to a significant increase of cleaning efficiency compared with the forerunners. With this, Trützschler wants to make the preliminary stage of the blow room more productive, especially because the processes could be regulated by an electronic waste control system. After all, according to Trützschler, intelligent cleaning can spare the wastage of up to 150 bales of cotton per year if it causes a maximum utilisation of raw material and a minimal loss of good fibres.
Targeted Raw Material Management Pays off
Oswald Baldischwieler from Swiss company Uster explains in his speech that in order to reach a consistent quality of cotton products like yarns and fabrics it is necessary to carry out an intensive examination of the cotton fibres in the early stages of production. Uster is a world leader in textile examination and quality control.
For Uster, targeted raw material management is important for the success of a spinning mill because it absorbs the main part of costs for the spinning mill. In most countries, the raw material cotton accounts for more than 60 percent of total yarn production costs. An optimal blending of fibres at the moment of opening the bale is prerequisite for a consistent and long-lasting yarn quality. It is crucial to keep yarn quality variations at a minimum and the quality as constant as possible in the long term. Bail management pays off.
Spinning Waste Cotton
Rieter AG, Harald Schwippl: The recycling of raw materials has been an increasing trend for several years to achieve more sustainability. In addition to the recycling of chemically or mechanically dissolved raw materials, the recycling of spinning waste is also a possibility to meet the increasing demand for raw material recycling.
For this purpose, carding or blowroom waste is processed. The study shows which adjustments are necessary in the spinning process for recycling. It also shows which spinning units and qualities are possible as a result. The raw material was used to produce a rotor yarn.
Shortening Production Processes
Yonathan Sissay from theEthiopian Textile Industry Development Institute, Addis Ababa, will report on the results of his research. It is about reducing lead times in production processes of clothing from the fabric warehouse and manufacturing to packaging and delivery. In the study, necessary and unnecessary working steps were analysed based on a cause analysis and new process flow charts for economically efficient work were defined following the Pareto principle.
Effect of Cotton Short Fiber Content on Drafting Force and its Variability in the Drafting Zone
These results are relevant for the machine setup. Within his research project, the Pakistani researcher Quaim Siddiqui found that the drafting force is the intuitive factor initiated by the dynamic frictional forces between slow moving and fast moving fibers in the drafting zone. According to Siddiqui, the fibre length is one of the most important factors influencing the drafting force and its variability. Using data from the onlinedraftometer, the scientific study analyses the interaction between the dynamic drafting force and its variability with respect to the short fiber content of carded cotton sliver.
In Advance:
Spinning and Textile Seminar: Expert meeting at the beginning of the cotton conference
On 28th September, that is on the eve of the conference, an exchange among experts will take place under the headline “Quality Requirements along the Textile Value-Added Chain”. All textile raw materials will be included here, we are thus going beyond cotton. The Bremen Fibre Institute e. V. (FIBRE), the Bremen Cotton Exchange, the Industrial Association Finishing – Yarns – Fabrics and Technical Textiles (IVGT) and the International Textiles Manufacturers Federation (ITMF) are inviting to this together.
Conference Venue
The conference venue this year is not the historic town hall, but the Chamber of Commerce in Bremen in the immediate vicinity of the Cotton Exchange. The Chamber of Commerce has been representing the interests of trade in Bremen since 1451 and is in close contact with the Bremen Cotton Exchange.
Other highlights of the anniversary week
This year´s International Cotton Conference is taking place in the anniversary year of the Bremen Cotton Exchange. The organisation was founded in 1872 and is celebrating its 150th birthday this year.
The International Cotton Conference is therefore embedded in an entire anniversary week. On the evening of September 29th, following the first day of the conference, the Bremen Cotton Exchange and the Faserinstitut Bremen invite you to the popular and well-known Bremen Cotton Night. This event is dedicated to the 150th anniversary of the Bremen Cotton Exchange and will be held at the Bremen Übersee-Museum for good reason. At the same time, the doors will open to an exhibition well worth seeing on the cultural history of cotton. The participants of the conference will be able to celebrate in the big atrium of the museum and get a tour of the exhibition in the meantime.Enjoying good music and good food, it will at last be able once again to spin personal networks and at the same time to pass in review the multi-faceted world of cotton with a beautiful and well-conceived exhibition.
Registration is underway
The starting gun for the registration has been fired: you can register at https://cottonconference-bremen.de/... from now on. You will also find regularly updated information there.
We will continually inform about the International Cotton Conference on 29 and 30 September and about the complete programme in the run-up in the form of further press releases as well as target-group-specific newsletters and also via our social media channels.
About the Bremen Cotton Exchange
• Founded in 1872 to strengthen the interests of the cotton trade and consumption in Germany, the Bremen Cotton Exchange has now been in the cotton business for 150 years. As an international court of arbitration, the Bremen Cotton Exchange always stands for neutrality.
• We offer various services to our members. Clear and neutral data and analyses are a part of this.
• As the ICA Bremen, together with the International Cotton Association in Liverpool and in cooperation with the Fibre Institute Bremen, we provide the International Quality Testing and Research Centre in Bremen. The Hanseatic city has now become the international centre for cotton testing and research, quality training and certification.
• We represent our members in all the important international bodies in the cotton world.
About the Fibre Institute Bremen e. V. (FIBRE)
• In its 66-years history, the Institute has developed from a cotton testing laboratory into a successful research institute in the fields of future-oriented fibres, technical textiles and fibre composites at the University of Bremen. It deals with basic scientific and application-oriented questions along the entire process chain from fibre production to the manufacturing of fibre composite components and more for the aircraft industry.
• FIBRE’s central international importance in cotton is shown by its work on the international harmonisation of cotton testing [e.g. round tests in cooperation with the ICAC and USDA-AMS], its work in central committees [ICAC Committee on Standardised Instrument Testing of Cotton (CSITC), ITMF Cotton Testing.
