- The lithium metaborate fusion assay method in all cases increased V205 recovery over ICP-MS with 4 acid-digestion ranging from a 14% to 28% increase.
- Iron results from the check assay selective sample suite ranged from 19.16% Fe203 up to 48.61% Fe203 with an average grade of 35.07% Fe203.
- Titanium results from the check assay selective sample suite ranged from 5.09% Ti02 up to 14.50% Ti02 with an average grade of 10.28% Ti02.
- Vanadium results from the check assay selective sample suite ranged from 0.10% V205 up to 0.32% V205 with an average grade of 0.22% V205.
- Two selective roadcut outcrop rock samples from the Keating Hill East Zone collected by company Q.P., Scott Dorion, during the FCP site visit ran 43.75% and 44.03% Fe203, 75% and 11.98% Ti02, and 0.32% and 0.30% V205 respectively.1
The Company is also pleased to announce that it has completed an in depth review of the 2012 SRK Consulting (Canada) Inc., and ALS Ammtec magnetic characterisation and metallurgical report completed on the Four Corners Project 2010 drill core, in light of the recent surge of iron ore prices above 100$USD/tonne. The review was conducted in order to gain a better understanding of all possible saleable products from Keating Hill East Zone titanomagnetite samples. Utilizing Standard Davis Tube assay methods, the composite sample assayed 29.1% Fe, 9.80% Ti02, and 0.23% V205, with the magnetic concentrate returning an impressive 63.10% Fe and 0.64% V205, indicating a strong fractionation of iron (~70% recovery) and vanadium (>90% recovery) into the magnetic concentrate. The Company is very pleased with the initial results reported and based on recommendations by the report will complete additional metallurgical optimization as well as preliminary market studies of potential iron, vanadium, and titanium products which could be produced.
“We are extremely pleased with the increased vanadium recoveries associated with the lithium metaborate fusion over the 4-acid digest which was historically used on the Four Corners Project. We believe this assay method can unlock additional vanadium potential on the project not fully realized previously, and it will be our preferred assay technique used for our upcoming exploration program on the property,” commented Delrey’s President and CEO Morgan Good. “It was the vanadium potential that originally attracted us to the Four Corners Project, but with the recent surge in iron ore prices above $100usd/ton we have renewed excitement in the potential all three metals (Fe-Ti-V) could have on this project. Initial reports have shown strong grades in magnetic concentrates as well as recoveries across the board (Fe ~70%, Ti >80%, V>90%), and we are looking forward to completing additional optimization which should allow us to fully realize the potential this project has going forward.”
All drill core was photographed, cut and sampled by Delrey Metals Corp. personnel at the Newfoundland and Labrador Department of Natural Resources core storage facility in Buchans, Newfoundland and Labrador. Intervals that had ½ core remaining were ¼ cored, and the remaining ¼ was placed back in the original box, and intervals that had a ¼ core remaining were sampled whole. Locations sampled were labelled with pink flagging and detailed sample notes were recorded for each sample. All rock grab samples were placed in polybags and locations marked in the field with labelled pink flagging tape. Sample notes for each sample were recorded using field-ready smartphones and GPS locations were recorded using handheld Garmin devices. Limiting the chain of custody, the samples were dropped off at ALS Global’s preparation facility in North Vancouver, British Columbia. Samples were prepared by crushing the entire sample to 70% passing -2mm, riffle splitting off 1kg and pulverizing the split to better than 85% passing 75 microns. After preparation, the prepared pulps were transported to ALS Global’s analytical laboratory in North Vancouver, British Columbia. The vanadium assays are determined by ME-MS85 lithium borate fusion and reported in parts per million (ppm) and converted by the lab into V205 (%). The remaining analytes were determined using ME-ICP61 four acid ICP-AES. The analytical results are verified with the application of industry standard Quality Control and Quality Assurance (QA-QC) procedures.
Delrey is a mineral exploration company focused on the acquisition, exploration and development of mineral resource properties, specifically in the strategic energy minerals space. The Company has an option to earn an 80% interest in the Four Corners Project located in Newfoundland and Labrador. The Four Corners Project is a Fe-Ti-V exploration project with positive historical drilling, metallurgy, and development economics. The Company also wholly owns the Star, Porcher, Peneece and Blackie Fe-Ti-V properties located along tidewater in western British Columbia. Delrey will continue to review and acquire projects showing potential for materials used in the energy storage and electric vehicle markets. The Company is based in Vancouver, British Columbia, and is listed on the CSE under the symbol “DLRY”.
Scott Dorion, P.Geo., is the designated Qualified Person of the Company as defined by NI 43-101 and has reviewed and approved the technical information contained in this release.
ON BEHALF OF THE BOARD OF DIRECTORS OF
DELREY METALS CORP.
President and Chief Executive Officer
Cautionary Note Regarding Forward-Looking Statements
Certain statements contained in this news release, constitute “forward-looking information” as such term is used in applicable Canadian securities laws. Forward-looking information is based on plans, expectations and estimates of management at the date the information is provided and is subject to certain factors and assumptions, including, but are not limited to, general business and economic uncertainties. Forward-looking information is subject to a variety of risks and uncertainties and other factors that could cause plans, estimates and actual results to vary materially from those projected in such forward-looking information. Factors that could cause the forward-looking information in this news release to change or to be inaccurate include, but are not limited to, the risk that any of the assumptions referred to prove not to be valid or reliable, which could result in delays, or cessation in planned work, that the Company’s financial condition and development plans change, delays in regulatory approval, risks associated with the interpretation of data, the geology, grade and continuity of mineral deposits, the possibility that results will not be consistent with the Company’s expectations, as well as the other risks and uncertainties applicable to mineral exploration and development activities and to the Company as set forth in the Company’s Management’s Discussion and Analysis reports filed under the Company’s profile at www.sedar.com. There can be no assurance that any forward-looking information will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, the reader should not place any undue reliance on forward-looking information or statements. The Company undertakes no obligation to update forward-looking information or statements, other than as required by applicable law.
Neither the CSE nor its Regulation Services Provider (as that term is defined in the policies of the CSE accepts responsibility for the adequacy or accuracy of this release).