Matrox Imaging Library new Software Tools for Bead-Inspection, Laser-based 3D range finding and support for new code types
MIL 9 Processing Pack 2's bead tool inspects material applied as a continuous sinuous bead, such as adhesives and sealants, and identifies discrepancies in application length, placement and width, as well as discontinuities. The allowable bead width, offset, gap and overall acceptance measure can be adjusted to meet specific inspection criteria.
Laser-based 3D range finding
MIL 9 Processing Pack 2 enhances the support for performing laser-based 3D range finding. The physical camera-laser setup requirements are now relaxed so the laser no longer needs to be perfectly perpendicular to the scanning surface. This not only makes the mechanical arrangement more practical, it also provides greater flexibility in terms of measurement range and accuracy. Also included is the ability to fit a plane to collected 3D points, masking unwanted regions if necessary, to create a reference for subsequent 3D analysis. With MIL 9 Processing Pack 2, developers can obtain basic statistics on scanned objects such as volume and deviation. MIL 9 Processing Pack 2 also enables the use of the native 3D range data provided by third-party 3D ranging cameras.
Support for new code types
Included in MIL 9 Processing Pack 2 is support for new code types (e.g., 4-State, EAN128 and EAN14), histogram-based color matching for handling multi-color regions, an interactive utility for experimenting with the color analysis tools, and a number of basic image processing operators (top/bottom-hat filter, window leveling, cumulative histogram, binarization off cumulative histogram, correlation, flat-field correction, dead-pixel correction, etc.).
MIL 9 on Windows® 7
Matrox Imaging will provide support for Windows® 7 through a refresh of MIL 9 called MIL 9 R2.
MIL 9 Processing Pack 2 will soon be available in Early Access form to registered users as part of the MIL maintenance program. Its official release is scheduled for early 2010. MIL 9 R2 is now available in Early Access form to registered users as part of the MIL maintenance program.
Its official release is scheduled for early 2010.
Direct Link: Matrox Imaging Library:
Halle B2 – Stand 302
For more information please contact:
Phone +49 81 42 / 4 48 41-0
Fax +49 81 42 / 4 48 41-90
Press releases you might also be interested in
Weitere Informationen zum Thema "Photonics":
Wie die Digitalisierung 2018 den Handel beeinflusst
Schon jetzt sind Technologien für neue Erfahrungen und Einkaufserlebnisse im Einzelhandel keine Science-Fiction mehr. Händler tun gut daran, sich 2018 auf die moderne Technik und die entsprechenden Kundenbedürfnisse einzustellen.Weiterlesen