Positioning System with High Long-Term Stability

Precision Alignment of Components and Samples with up to Six Degrees of Freedom

High precision and high stiffness: The parallel-kinematic positioning system can position loads of up to 10 kg in six degrees of freedom with nanometer precision and hold them in a stable position / Source: PI
(PresseBox) ( Karlsruhe, )
In the semiconductor industry or photonics applications, components often need to be precisely positioned for each single processing step and then held in a stable position reliably. Similarly, the same also applies to samples during X-ray examinations. PI (Physik Instrumente) now offers a practical solution for those types of and similar applications with the SpaceFab Q-845:

The extremely accurate parallel-kinematic positioning system can not only position loads up to 1 kg in six degrees of freedom with nanometer precision, but also keep them in a long-term stable position. The basis of this is made up of six linear stages, which are arranged respectively in three 90-degree-offset double stacks acting on a motion platform. This allows them to achieve a maximum travel range of ±7 mm in the X and Y directions and ±5 mm in the Z direction. The rotation range of the three rotational axes are a maximum of ±7° (in θX, θY) or ± 8 degrees (in θZ). Piezoelectric inertia drives are the driving force for the linear stages. Thanks to their holding torque at rest, no energy is consumed while holding at the target position and no heat is generated. This means that the positioning systems are also suitable for applications in a vacuum (vacuum compatible to 10-6 hPa).

Mounting in any Spatial Arrangement

Mounting of the long-term stable positioning system is possible in any spatial arrangement. The quality of the preloaded Cardan und linear bearings allows the same performance in "upside down" or "lateral hanging" applications. The construction allows adaptation to the respective load case, but other customer requirements can also be realized within a very short time. The C-886 multi-axis controller is recommended for control, which can be easily integrated into the system and, with the help of the PIMikroMove software, allows user-friendly control. Corresponding software modules are available for integration into external applications such as Matlab, LabView etc. If required, the controller is able to control drives for two additional axes via add-on cards.
Für die oben stehenden Pressemitteilungen, das angezeigte Event bzw. das Stellenangebot sowie für das angezeigte Bild- und Tonmaterial ist allein der jeweils angegebene Herausgeber (siehe Firmeninfo bei Klick auf Bild/Meldungstitel oder Firmeninfo rechte Spalte) verantwortlich. Dieser ist in der Regel auch Urheber der Pressetexte sowie der angehängten Bild-, Ton- und Informationsmaterialien.
Die Nutzung von hier veröffentlichten Informationen zur Eigeninformation und redaktionellen Weiterverarbeitung ist in der Regel kostenfrei. Bitte klären Sie vor einer Weiterverwendung urheberrechtliche Fragen mit dem angegebenen Herausgeber. Bei Veröffentlichung senden Sie bitte ein Belegexemplar an service@pressebox.de.