Contact
QR code for the current URL

Story Box-ID: 860374

toolcraft AG Handelsstraße 1 91166 Georgensgmünd, Germany http://www.toolcraft.de
Contact Ms Tina Hartmann-H'Lawatscheck +49 9172 6956172
Company logo of toolcraft AG

Metal laser melting finds its way into the operating theatre

3D-printed bone drill improves surgical procedures

(PresseBox) (Georgensgmünd, )
Metal laser melting is used in many sectors. The advantages of the technology over machining not only lead to peak performances in motor sports and aerospace, but even pave the way for ground-breaking success in the medical technology sector. One example of this is the use of a 3D-printed bone drill, which is capable of preventing possible tissue damage caused during operations with traditionally manufactured drills.

Temperature-induced tissue damage caused by traditionally manufactured drills
The Institute of Production Engineering and Machine Tools (IFW) at the Leibniz University in Hannover, Germany, turned to toolcraft while carrying out a research and development project on the development of a machining tool capable of cutting bone without causing thermal-induced osteonecrosis. The heat produced when cutting bone may cause tissue damage. This occurs at temperatures of around 48°C and higher. Since cooling the tool may cause fluid to enter the wound, it is not possible to use conventional tools with a cooling system. To date, surgery has been performed iteratively, i.e. the drilling process is repeatedly interrupted in order to keep the temperature as low as possible.

Metal laser melting finds its way into the operating theatre - Consistently low temperatures
However, thanks to metal laser melting, it is possible to manufacture drills with integrated cooling ducts. This allows the coolant to flow inside the tool – along the helix and back to the tool holder – without coming into contact with the wound. toolcraft also developed a non-rotating pre-spindle attachment with an inflow and outflow function for the coolant. A continuous supply of coolant is ensured by the attached coolant tank and pump. The internally cooled prototype was modelled on a conventional bone drill with a diameter of 6 mm. The drill's shape had to be kept the same to make it easier for users to adapt to the new tool. It was also important that the material used is well tolerated by patients. A flow and return pipe ensures a continuous flow of coolant. The internal circular cooling ducts with a diameter of 1.2 mm take the thermal energy away from the cutting edge. Horizontal drilled holes were added which link the cooling circuit to the drill so that the coolant can be supplied and taken away. A circlip groove is used to attach the manifold. Sealing the two chambers in the manifold posed a further challenge.

Step by step to success
At the outset of the project, the cooling capacity was determined in terms of the volumetric flow rate, temperature and thermal capacity of the coolant. The project team then developed a method for bringing a closed cooling circuit into the tool substrate while maintaining tool stability and ensuring that the tool was suitable for performing the required processes. The biocompatible material 1.4404 was selected for the drill. The shape of the drill and the internal cooling ducts was designed by Schmidt WFT using CAD and simulation software. After the drill was produced using 3D printing and the tool was machined to its final size, practical tests were performed by IFW. Using water as a coolant, IFW drilled and measured the process temperature in artificial and bovine bone. In doing so, they measured reference temperatures at higher and lower feed rates and when the tool cooling system was turned on and off.

3D-printed bone drill improves surgical procedures
The results of the drilling tests show that the innovative drill significantly reduces the temperature produced by up to around 70%. Thanks to the ability of the internal cooling system to compensate for increases in temperature, low feed rates no longer lead to higher temperatures. The choice of tool has a considerable impact on the success of bone surgery. Excessively high process temperatures put bones at risk of damage during almost all bone cutting procedures. This means that the technology could also be beneficial in a wide variety of other areas, such as the manufacture of saws.

Website Promotion

Website Promotion
Homepage toolcraft

toolcraft AG

As a partner of engineers of almost all industrial sectors toolcraft manufactures precision parts, assemblies, moulds and injection moulded parts. Industries are for example the semiconductors, aerospace, medical technology, optical industry, special machinery manufacturing as well as motor sports and automotive.

Thereby toolcraft relies on innovations and invests in future technologies like 3D printing in metal as well as construction of individual robotic solutions. Part of the corporate philosophy is also an intensive cooperation with partners, such as Unicam Software GmbH, YPTI Indonesia, Wohlrab Aufdampftechnik GmbH.

The medium-sized family-owned company, located in Georgensgmünd and Spalt, was founded in 1989 by Bernd Krebs.

The publisher indicated in each case (see company info by clicking on image/title or company info in the right-hand column) is solely responsible for the stories above, the event or job offer shown and for the image and audio material displayed. As a rule, the publisher is also the author of the texts and the attached image, audio and information material. The use of information published here is generally free of charge for personal information and editorial processing. Please clarify any copyright issues with the stated publisher before further use. In case of publication, please send a specimen copy to service@pressebox.de.
Important note:

Systematic data storage as well as the use of even parts of this database are only permitted with the written consent of unn | UNITED NEWS NETWORK GmbH.

unn | UNITED NEWS NETWORK GmbH 2002–2024, All rights reserved

The publisher indicated in each case (see company info by clicking on image/title or company info in the right-hand column) is solely responsible for the stories above, the event or job offer shown and for the image and audio material displayed. As a rule, the publisher is also the author of the texts and the attached image, audio and information material. The use of information published here is generally free of charge for personal information and editorial processing. Please clarify any copyright issues with the stated publisher before further use. In case of publication, please send a specimen copy to service@pressebox.de.