ADLINK Technology Debuts 6U CompactPCI® Processor Blade with Intel® Core(TM) i7 and QM57 Chipset, Supporting Optional Extended Temperature Range
ADLINK Technology Inc. (TAIEX: 6166) announces the release of the cPCI-6510 Series of 6U CompactPCI® blades featuring a 32nm Intel® Core(TM) i7 processor with 2.53GHz clock speed and up to 3.2GHz maximum turbo frequency. The Core(TM) i7 processor incorporates dualcore computing power, integrated graphics and memory controllers, enabling greater overall performance and higher data transfer rates. The cPCI-6510 supports dualchannel DDR3-1066 SDRAM soldered onboard memory with ECC up to a maximum of 8GB and utilizes the latest Mobile Intel® QM57 Platform Controller Hub.
Through careful component selection, the cPCI-6510 optionally supports an extended operating temperature range of -40°C to +80°C. With all components soldered onboard, it is an ideal solution for the demanding requirements of military, transportation, and communications applications. To meet the specific needs of mission critical applications in harsh environments, ADLINK also offers the CT-61, a rugged conductioncooled version of the cPCI-6510 with identical electronic design that will be ready in Q3 of 2010.
Combining the benefits of the Intel® Core(TM) i7 processor and Intel® QM57 chipset, the cPCI-6510 provides the optimum performanceperwatt ratio, fourthread computing capability, integrated graphics and extensive I/O support. The Intel® Core(TM) i7 processor gives an improvement in computing performance of 90% over the 45nm Intel® Core(TM) 2 Duo T9400 processor and 25% compared to a quadcore Xeon® L5408 processor. For improved graphics capabilities, the Intel® Core(TM) i7 integrates the GPU into the processor, providing enhanced graphics performance 2.6 times better than the GM45 chipset solution. In addition, the cPCI-6510 supports Intel® Hyper-Threading Technology for multithreading performance and Intel® Turbo Boost Technology that allows processor cores to run faster than the base operating frequency when conditions permit.
The cPCI-6510 provides two PMC sites at PCI-X 64bit/133MHz and one PCI Express® x8 XMC site that shares the same space as the inner PMC site. A 2.5" Serial ATA hard drive or flash disk can be equipped on the cPCI-6510V version and occupies one of the PMC sites. One CompactFlash® socket is also available onboard. RAID functionality is supported on SCSI, SAS or SATA interfaces via optional Rear Transition Modules.
The cPCI-6510 Series is validated for use with Windows® XP, Windows® 7, Linux and VxWorks.
For more information, please go to http://www.adlinktech.com/....
ADLINK Technology GmbH
ADLINK Technology provides a wide range of embedded computing products and services to the test & measurement, automation & process control, gaming, communications, medical, network security, and transportation industries. ADLINK products include PCI Express®based data acquisition and I/O; vision and motion control; and AdvancedTCA, CompactPCI, and Computeron-Modules (COMs) for industrial computing. With the acquisition of Ampro Computers, Inc., ADLINK also provides a wide range of Extreme Rugged and Rugged Single Board Computers, Computeron-Modules and Systems under the brand name Ampro by ADLINK. ADLINK strives to minimize the total cost of ownership (TCO) of its customers by providing customization and system integration services, maintaining low manufacturing costs, and extending the lifecycle of its products.
ADLINK is a global company with headquarters and manufacturing in Taiwan; R&D and integration in Taiwan, China, and the US; and an extensive network of worldwide sales and support offices. ADLINK is ISO-9001, ISO-14001, and TL9000 certified, is an Associate Member of the Intel® Embedded and Communications Alliance, an Executive Member of PICMG, and a Sponsor Member of the PXI Systems Alliance. ADLINK is a publicly traded company listed on the TAIEX Taiwan Stock Exchange (stock code: 6166).
Press releases you might also be interested in
Weitere Informationen zum Thema "Hardware":
Ixsystems liefert Open-Source-Hardware für Rechenzentren
Ein komplettes Hardware-Sortiment, basierend auf Open Source und gefertigt im Silicon Valley, geht das? Seit rund 20 Jahren demonstriert iXsystems, dass das funktioniert – ganz ohne fremdes Kapital.Weiterlesen