"Imagine that a surface with a functional layer only a few micrometers thin is to be heated to over 1000°C," says Dipl.-Ing. Dirk Hauschild, Director of Thin-Film Activation at LIMO Lissotschenko Mikrooptik GmbH in Dortmund. "And think about doing this with a substrate that is already destroyed at 500°C." But it doesn't stop there: The layers that are to be optimized are often composed of small particles or molecules which lose their desired properties and structural size just a few seconds after the processing temperature has been reached.
Here, there is a demand for fast and targeted heating and cooling. This challenge can be met with the use of an in-line high-temperature process that provides targeted surface heating in a matter of milliseconds. The Activation Line 300 was specifically designed to fill this need. With its high electro-optic energy efficiency of over 40%, the most powerful L³ LIMO Line Laser (a CW output of over 13kW with a homogeneous line focus 300 mm long) heats even the thinnest functional layers (thicknesses of over 0.1 µm to more than 100 µm) with an intensity of 40kW/cm² in a few milliseconds - delivering outstanding precision and consistency (beam quality M² < 3 in the processing direction) in the process. Because of the low thermal capacity, the layers also cool down again very quickly. "The laser energy thus serves to functionalize the layer and, as a result, add to its value," says Dirk Hauschild. "Thanks to the targeted irradiation using the laser line profile, the user can uniformly temper large surface areas. The Activation Line 300 thus enables customized annealing, crystallization and sintering processes with fully closed surfaces."
"Precision tempering of coatings on glass, metal, ceramics, films and even on paper is also possible," notes Hauschild. "For the production process, the user can also utilize extremely small energy and process windows that would otherwise not be feasible with the use of conventional technologies. I invite you to do the following: Come visit us in Dortmund and process your innovative materials and coating samples together with our team in our Applications Center to obtain the optimal design and customization of your Activation Line laser source."
You can also learn more about precision tempering and LIMO at the Photonics Moscow trade fair in Russia (25 - 27 March 2014, hall 7.2 / booth C51) and at the International Laser Technology Congress AKL in Aachen, Germany (7 - 9 May 2014).