VIAVI Solutions sets new standards introducing the industry's first dedicated optical loss test set for MPO and MTP fiber connections. The device distributed by LASER COMPONENTS needs less than six seconds to measure fiber length, optical loss and polarity of all twelve fibers in a standard MPO connection. It also enables visual inspection of the fiber end faces. All the results are shown on a user-friendly 3.5" touchscreen. The color-coded pass/ fail display lets the user know if all the values are within the permitted limits. Customer specifications, test wavelength, and reserve are also displayed to provide in-depth analysis. If required, the MPOLx also generates a detailed certification report.
An MPOLx test set consists of two devices, each with its own light source, power meter and connector microscope. Measurements can be conducted from both sides of the fiber with the results also being displayed on both devices. Thus, the technician can do his work most efficiently without constantly moving between both measurement points.
So far, MPO and MTP multi-fiber connectors have mainly been used to bundle transmissions inside a data center. Adapting to the ever-growing demand, many companies and data centers now use bandwidths of 40 to 100 Gbit/s to connect terminals. It goes without saying that optical losses in these kinds of fiber connections must also meet all specifications. These Tier 1 certifications can be conducted fast and with outstanding precision using VIAVI's new MPOLx.
More Information
www.lasercomponents.com/...
Trade Shows
Breko Glasfasermesse, March 13 - 14, 2018, Messe Frankfurt, Germany
EuroExpo, March 21 - 22, 2018, Trondheim, Norway, Hall E
analytica, April 10 - 13, 2018, Messe München, Germany, Booth A2.500
The Vision Show, April 10 - 12, 2018, Boston, MA, USA, Booth 410
Photonex London, April 18, 2018, Imperial College London, UK, Booth S14
SPIE Defense & Commercial Sensing, April 17 - 19, 2018, Orlando, FL, USA, Booth 1029
SPIE PHOTONICS Europe, April, 24 - 25, 2018, Strasbourg, France, Booth G325
Scandinavian Electronics Event, April, 24 - 26, 2018, Kistamässan, Sweden, Booth C08:49
LaSys, June 05 - 07, 2018, Messe Stuttgart, Germany, Booth 4C33
ANGACOM, June 12 - 14, 2018, Messe Köln, Germany, Booth 7.B09
Photonex Schottland, June 14, 2018, Edinburgh, UK, Booth S5
automatica, June 19 - 22, 2018, Messe München, Germany, Booth B5.501
Sensor+Test, June 26 - 28, 2018, Messe Nürnberg, Germany, Booth 1.256
Sensors Expo & Conference, June 27 - 28, 2018, San Jose, CA, USA, Booth 225
SPIE Optics+Photonics, August 19 - 23, 2018, San Diego, CA, USA, Booth 527
An MPOLx test set consists of two devices, each with its own light source, power meter and connector microscope. Measurements can be conducted from both sides of the fiber with the results also being displayed on both devices. Thus, the technician can do his work most efficiently without constantly moving between both measurement points.
So far, MPO and MTP multi-fiber connectors have mainly been used to bundle transmissions inside a data center. Adapting to the ever-growing demand, many companies and data centers now use bandwidths of 40 to 100 Gbit/s to connect terminals. It goes without saying that optical losses in these kinds of fiber connections must also meet all specifications. These Tier 1 certifications can be conducted fast and with outstanding precision using VIAVI's new MPOLx.
More Information
www.lasercomponents.com/...
Trade Shows
Breko Glasfasermesse, March 13 - 14, 2018, Messe Frankfurt, Germany
EuroExpo, March 21 - 22, 2018, Trondheim, Norway, Hall E
analytica, April 10 - 13, 2018, Messe München, Germany, Booth A2.500
The Vision Show, April 10 - 12, 2018, Boston, MA, USA, Booth 410
Photonex London, April 18, 2018, Imperial College London, UK, Booth S14
SPIE Defense & Commercial Sensing, April 17 - 19, 2018, Orlando, FL, USA, Booth 1029
SPIE PHOTONICS Europe, April, 24 - 25, 2018, Strasbourg, France, Booth G325
Scandinavian Electronics Event, April, 24 - 26, 2018, Kistamässan, Sweden, Booth C08:49
LaSys, June 05 - 07, 2018, Messe Stuttgart, Germany, Booth 4C33
ANGACOM, June 12 - 14, 2018, Messe Köln, Germany, Booth 7.B09
Photonex Schottland, June 14, 2018, Edinburgh, UK, Booth S5
automatica, June 19 - 22, 2018, Messe München, Germany, Booth B5.501
Sensor+Test, June 26 - 28, 2018, Messe Nürnberg, Germany, Booth 1.256
Sensors Expo & Conference, June 27 - 28, 2018, San Jose, CA, USA, Booth 225
SPIE Optics+Photonics, August 19 - 23, 2018, San Diego, CA, USA, Booth 527
