Fifth Anniversary of Our Calibration Laboratory for Laser Power Meters

Fifth Anniversary of Our Calibration Laboratory
(PresseBox) ( Olching, )
To obtain and maintain ISO 9001 certification, measurement devices must undergo inspection in certain intervals - usually every 12 months. This includes your measurement devices.

Fast and Inexpensive Thanks to the service now available in Germany, you receive your calibrated detectors back more quickly. Processing time is typically less than five business days, and the calibration equipment is the same equipment used by the Canadian manufacturer Genteceo!

All of Genteceo's thermopilebased power meters and monitors/readout devices can be calibrated. Bundles consisting of a power meter and a readout unit from other manufacturers can also be processed.

The NIST/PTB calibration of detectors is carried out with a 1064 nm laser between 30 mW and 100 W. Several measurements are then compared; deviations in the measurement results may not exceed a minimum tolerance level. Genteceo's meters also include a free socalled "Variance Report" - a report comparing the results from the previous measurement.

You will receive your calibrated unit back along with a "Certificate of Calibration." So that you know what you are measuring!

For more information visit our website at http://www.lasercomponents.com/...
The publisher indicated in each case is solely responsible for the press releases above, the event or job offer displayed, and the image and sound material used (see company info when clicking on image/message title or company info right column). As a rule, the publisher is also the author of the press releases and the attached image, sound and information material.
The use of information published here for personal information and editorial processing is generally free of charge. Please clarify any copyright issues with the stated publisher before further use. In the event of publication, please send a specimen copy to service@pressebox.de.