Lantech IWP-1000bg is a reliable 802.11b/g WLAN with 2 ports LAN Access Point. It can be configured to operate in AP/Bridge/Repeater/AP-Client mode. Users are able to configure IWP-1000bg by WEB interface via LAN port or WLAN interface. IWP-1000bg provides dual Ethernet ports in switch mode, so that users can use Daisy Chain to reduce the usage of Ethernet switch ports.
With IEEE802.11b/g dual mode capability, IWP-1000bg is able to operate with a maximum link speed of 54Mbps to maximize the capacity of communication channel. The security standards include WEP, WPA, WPA-PSK (TKIP, AES), WPA2, WPA2-PSK (TKIP, AES), 802.1X and Radius. These various kinds of security standards for WLAN are also configurable to ensure the security of data transmission.
Lantech IWP-1000bg supports HTTPs protocol over LAN or WLAN to assure the data security when users make configuration remotely. IWP-1000 also support switch mode. Users are able to use the Daisy Chain to reduce usage of Ethernet switch port. The redundant DC power inputs help to guarantee a non-stop operation. The backup power input will take over immediately when the primary DC power input fails.
IPW-1000bg also provides P.D. feature on ETH2 which is fully compliant with IEEE802.3af PoE P.D. specification.
- Dual Radio for 802.11b/g
- Supports AP / Bridge / Repeater / AP-Client Mode
- Supports X-Roaming < 100ms
- IP30 housing for industrial environment
- Provides 1 PoE P.D. port with 1KV isolation
http://www.lantechcom.eu/...
With IEEE802.11b/g dual mode capability, IWP-1000bg is able to operate with a maximum link speed of 54Mbps to maximize the capacity of communication channel. The security standards include WEP, WPA, WPA-PSK (TKIP, AES), WPA2, WPA2-PSK (TKIP, AES), 802.1X and Radius. These various kinds of security standards for WLAN are also configurable to ensure the security of data transmission.
Lantech IWP-1000bg supports HTTPs protocol over LAN or WLAN to assure the data security when users make configuration remotely. IWP-1000 also support switch mode. Users are able to use the Daisy Chain to reduce usage of Ethernet switch port. The redundant DC power inputs help to guarantee a non-stop operation. The backup power input will take over immediately when the primary DC power input fails.
IPW-1000bg also provides P.D. feature on ETH2 which is fully compliant with IEEE802.3af PoE P.D. specification.
- Dual Radio for 802.11b/g
- Supports AP / Bridge / Repeater / AP-Client Mode
- Supports X-Roaming < 100ms
- IP30 housing for industrial environment
- Provides 1 PoE P.D. port with 1KV isolation
http://www.lantechcom.eu/...
