Lantech IPES-2208CB

Klingenberg, (PresseBox) - .
- 8 10/100TX + 2 10/100/1000T/Dual Speed SFP Combo
- w/ 8-PoE-Injector ModeA/B 802.3af Managed Industrial Switch
- Support IEEE802.3af+ up to 25W per port
- Support Active PoE and Passive PoE Mode B
- Support Pro-Ring2se ring protection <20ms recovery time
- Accept 24V/48VDC input and feed same voltage output
- Support Advanced SNMP including QoS, IGMP query, SSH/SSL, DDM
- PoE management incl. Detection, Delay and Scheduling
- Environmental monitoring to display voltage, current, temperature

The Lantech IPES-2208CB is an 8-port 10/100BaseTX + 2-port 10/100/1000T/Dual Speed SFP Combo industrial switch w/8 POE 802.3af+ Injectors. The SFP connection is suitable with 100M or 1000M Dual Speed. The advanced SNMP management features include QoS for 4 queues, 802.1q VLAN, IGMP snooping and query, SSH/SSL*, DDM(need to work with SFP that has diagnostic function) as well as Web Ping, CPU load monitoring, SNTP and SMTP etc Compliant with 802.3af standard, the Lantech IPES-2208CA is able to feed each PoE port up to 25 Watts@52 VDC providing the connected PD devices. The built-in relay contact is able to connect with alarm system and send Email, SNMP trap and Syslog alert in case of power or connection failure.

The unique configurable Mode A or Mode B design maximizes the IPES-2208CB applications to fit with widest range of PDs in the marketplace including non-POE standard IP CAM, Wireless AP, Radios, VOIP phones etc. In the case of passive mode input, the range can go from 18V~60VDC and can be set as "Passive PoE" on port 5,6,7,8 to drive power over Ethernet cable at max. 30W@port. It also supports relay contact to connect with alarm system in case of power or port failure.

Lantech IPES-2208CB supports advanced PoE management including PoE detection, delay and scheduling. PoE detection can detect if the connected PD is hang up then restart the PD; PoE delay is to delay power feeding when the switch is completely booted up; PoE scheduling is to allow pre-set power feeding schedule upon routine time table. The exclusive IGMP source only function can auto choose IGMP query for surveillance application.

The innovative Pro-Ring2se self-recovery scheme can recover Ring network in less than 20ms for single ring up to 50 switches with only one step configuration. Lantech IPES-2208CB builds all the important management features required in large network like DHCP Client/Server, SSH/SSL*, 802.1X authentication, IGMP Query / Snooping and source only for reverse multicast flow ,advanced QoS and QinQ. It also supports Ping commands via Web to detect whether a specific device is connected for easy trouble-shooting.

The built-in factory reset button and watchdog design can restore all setting back to factory default and automatically reboot the switch when CPU is found dead. The optional environmental monitoring can detect switch temperature, voltage and current where can send the SNMP traps, email alert when abnormal.

The Lantech IPES-2208CB can support up to 6KV ESD contact per UTP port to minimize the burn down risk where the electronic static discharge is usually found.

It is the best to be used in municipal, city surveillance, automation, transportation, mining, heavy Industrial factory where needs PoE functionality under harsh environment. The -E model can be used in extreme environments with an operating temperature range of -40°C to 75°C.

The Lantech IPES-2208CB is an 8-port 10/100BaseTX + 2-port 10/100/1000T/Dual Speed SFP Combo industrial switch w/8 POE 802.3af+ Injectors. The SFP connection is suitable with 100M or 1000M Dual Speed. The advanced SNMP management features include QoS for 4 queues, 802.1q VLAN, IGMP snooping and query, SSH/SSL*, DDM(need to work with SFP that has diagnostic function) as well as Web Ping, CPU load monitoring, SNTP and SMTP etc Compliant with 802.3af standard, the Lantech IPES-2208CA is able to feed each PoE port up to 25 Watts@52 VDC providing the connected PD devices. The built-in relay contact is able to connect with alarm system and send Email, SNMP trap and Syslog alert in case of power or connection failure.

The unique configurable Mode A or Mode B design maximizes the IPES-2208CB applications to fit with widest range of PDs in the marketplace including non-POE standard IP CAM, Wireless AP, Radios, VOIP phones etc. In the case of passive mode input, the range can go from 18V~60VDC and can be set as "Passive PoE" on port 5,6,7,8 to drive power over Ethernet cable at max. 30W@port. It also supports relay contact to connect with alarm system in case of power or port failure.

Lantech IPES-2208CB supports advanced PoE management including PoE detection, delay and scheduling. PoE detection can detect if the connected PD is hang up then restart the PD; PoE delay is to delay power feeding when the switch is completely booted up; PoE scheduling is to allow pre-set power feeding schedule upon routine time table. The exclusive IGMP source only function can auto choose IGMP query for surveillance application.

The innovative Pro-Ring2se self-recovery scheme can recover Ring network in less than 20ms for single ring up to 50 switches with only one step configuration. Lantech IPES-2208CB builds all the important management features required in large network like DHCP Client/Server, SSH/SSL*, 802.1X authentication, IGMP Query / Snooping and source only for reverse multicast flow ,advanced QoS and QinQ. It also supports Ping commands via Web to detect whether a specific device is connected for easy trouble-shooting.

The built-in factory reset button and watchdog design can restore all setting back to factory default and automatically reboot the switch when CPU is found dead. The optional environmental monitoring can detect switch temperature, voltage and current where can send the SNMP traps, email alert when abnormal.

The Lantech IPES-2208CB can support up to 6KV ESD contact per UTP port to minimize the burn down risk where the electronic static discharge is usually found.

It is the best to be used in municipal, city surveillance, automation, transportation, mining, heavy Industrial factory where needs PoE functionality under harsh environment. The -E model can be used in extreme environments with an operating temperature range of -40°C to 75°C.

Website Promotion

Press releases you might also be interested in

Subscribe for news

The subscribtion service of the PresseBox informs you about press information of a certain topic by your choice at a choosen time. Please enter your email address to receive the email with the press releases.

An error occurred!

Thank you! You will receive a confirmation email within a few minutes.


I want to subscribe to the gratis press mail and have read and accepted the conditions.