China Diecasting 2015 was held in Shanghai during the second week in July this year. Celebrating its 10th anniversary in 2015, the show achieved a remarkable breakthrough from every aspect.
The space covered 18.000m², an increase by 46% compared to 2014, and with over 255 exhibitors, an increase by 68% compared to 2014. There were more than 8.392 trade visitors within the Diecasting Industry from over 10 countries and regions around the world.
Just the extraordinary amount of visitors may also be due to the Aluminium China fair, which was located at the same fairground during the same time period. To some extent, the different organizers began to understand the demand of all participants of the industry to combine overlapping topics to achieve a higher attraction and value to visit fairs and congresses.
China Diecasting was again organized by FICMES and Nürnberg Messe, and is increasingly becoming the leading event in China covering all relevant topics concerning the entire process chain for diecasting. It is not just a place where demand meets supply, this trade show is also a unique time and place to exchange knowledge and expertise.
We have met acknowledged representatives of diecasting companies, solution providers and equipment manufacturers themselves, searching for related and new partners as well as finding out top trends and industry innovations.
The fair was accompanied by two separate Automotive Casting Conferences, touching on the latest lightweight development and facing the environmental challenges in China, where the authorities are already acting and regulate the production into the limitation of using cars.
Experts do not necessarily predict downturns in the automotive and casting industry, but remind the industry to face these challenges and to stay highly innovative.
Chinese FICMES and Nürnberg Messe are congenial partners in achieving their common goals and continue to maintain their excellent position. Through this, they will convince even more partners, visitors from other foundries, diecasting and automotive chapters in China and maybe even include new partners that add and reflect on the entire industry.
Foundry Institution of Chinese Mechanical Engineering Society (FICMES)
founded in 1962, and formally admitted to be a member of World Foundry Organization (WFO) in 1978. FICMES has been committing itself to the industrial development of foundry and die casting of China, and strengthening the extensive academic & technological exchange and cooperation with all of the foundry organizations of the world. FICMES consists of the council, secretariat and its subsidiary 14 technical committees and 8 working committees. Members of the FICMES include domestic and foreign foundry enterprises in China, universities, institutions, and so on.
NürnbergMesse
is one of today's fastest-growing exhibition companies in Europe. The exhibition centre is even one of the 20 largest in the world. The portfolio covers some 120 national and international exhibitions and congresses at the Nürnberg location and worldwide.
Nürnberg Messe is also the organizer of EUROGUSS, which takes place every two years and is the biggest trade fair of its kind throughout Europe, focuses on innovative solutions for die casting processes like aluminium die casting, magnesium die casting or zinc die casting. The product spectrum is rounded off by themes like rapid prototyping, CNC machines, metal alloys, die casting moulds, peripheral devices, joining processes, process optimization, energy efficiency, material testing, die casting machinery or 3D printing.
EUROGUSS is todays Europe's biggest and most important trade fair for the die casting industry. The event set new records in 2014 with 470 exhibitors and 11,187 trade visitors.
THE 2ND INTERNATIONAL AUTOMOTIVE CASTING CONFERENCE
July 7th , 2015, Shanghai, China Radisson Blu Hotel Pudong Century Park , Magnolia Hall
Automotive industry is counted as one of the biggest markets in the die casting and mould fields, with prominent advantages of its amounts, varieties, qualities and materials. The Chinese automotive industry is developing very fast these years and is forecasted to continue its growth furthermore, which makes it put into use in big scales. The reconstruction of this industry provides wider space for its future development in providing lighter auto parts which reflect the latest development and modern technologies in die casting industry.
Based on the Asia's biggest and most successful trade fair specializing in die casting industry - The 10th China International Die Casting Congress & Exhibition", "The 2nd International Automotive Casting Conference" was organized to feature the die casting solutions to meet the growing demands of the industry. Experts in the industry were invited to share their views and expertise focusing current issues of the sector on the different topics:
● Global market and trend of the manufacture of automotive parts
● Innovation on the design and production of automotive casting
● Technologies and solutions for automotive casting
Attendee profile:
● Automotive manufacturers
● Casting companies
● Casting solution providers
● Organizer:
NürnbergMesse FICMES
Please see the full program in our latest report about this event: goo.gl/D9JMKE
Asia Automotive Lightweight Procurement Symposium 2015 - organized by AluMag® Automotive GmbH
AUDI, GEELY and MAGNA together with DGS, Kurtz, Guangdong Hongtu, Kobelco, Sapa, Novelis, Strikowestofen, JSC and Voestalpine have presented their newest lightweight achievements and competences at the Asia Automotive Lightweight Procurement Symposium, which took place from the 6th - 8th of July 2015 at the Jumeirah Himalayas Hotel in Shanghai.
A long list of International as well as national automotive lightweight executives were attending the 2nd Automotive Lightweight Procurement Symposium. Beside a row of exiting speeches focused on the topics Automotive Lightweighting, supply chain and procurement management, the symposium was also an ideal location to interchange with executives from many leading OEMs and suppliers from all over the world.
The symposium was held in the days during the Aluminium China and China Diecasting shows, both taking place at the Shanghai New International Expo Centre which is located next to the symposium venue, Jumeirah Himalayas Hotel.
Please see the full program in our latest report about this event : goo.gl/uLJ1GT Coming soon: The complete presentations of the event very soon on www.Foundry-Planet.com
The space covered 18.000m², an increase by 46% compared to 2014, and with over 255 exhibitors, an increase by 68% compared to 2014. There were more than 8.392 trade visitors within the Diecasting Industry from over 10 countries and regions around the world.
Just the extraordinary amount of visitors may also be due to the Aluminium China fair, which was located at the same fairground during the same time period. To some extent, the different organizers began to understand the demand of all participants of the industry to combine overlapping topics to achieve a higher attraction and value to visit fairs and congresses.
China Diecasting was again organized by FICMES and Nürnberg Messe, and is increasingly becoming the leading event in China covering all relevant topics concerning the entire process chain for diecasting. It is not just a place where demand meets supply, this trade show is also a unique time and place to exchange knowledge and expertise.
We have met acknowledged representatives of diecasting companies, solution providers and equipment manufacturers themselves, searching for related and new partners as well as finding out top trends and industry innovations.
The fair was accompanied by two separate Automotive Casting Conferences, touching on the latest lightweight development and facing the environmental challenges in China, where the authorities are already acting and regulate the production into the limitation of using cars.
Experts do not necessarily predict downturns in the automotive and casting industry, but remind the industry to face these challenges and to stay highly innovative.
Chinese FICMES and Nürnberg Messe are congenial partners in achieving their common goals and continue to maintain their excellent position. Through this, they will convince even more partners, visitors from other foundries, diecasting and automotive chapters in China and maybe even include new partners that add and reflect on the entire industry.
Foundry Institution of Chinese Mechanical Engineering Society (FICMES)
founded in 1962, and formally admitted to be a member of World Foundry Organization (WFO) in 1978. FICMES has been committing itself to the industrial development of foundry and die casting of China, and strengthening the extensive academic & technological exchange and cooperation with all of the foundry organizations of the world. FICMES consists of the council, secretariat and its subsidiary 14 technical committees and 8 working committees. Members of the FICMES include domestic and foreign foundry enterprises in China, universities, institutions, and so on.
NürnbergMesse
is one of today's fastest-growing exhibition companies in Europe. The exhibition centre is even one of the 20 largest in the world. The portfolio covers some 120 national and international exhibitions and congresses at the Nürnberg location and worldwide.
Nürnberg Messe is also the organizer of EUROGUSS, which takes place every two years and is the biggest trade fair of its kind throughout Europe, focuses on innovative solutions for die casting processes like aluminium die casting, magnesium die casting or zinc die casting. The product spectrum is rounded off by themes like rapid prototyping, CNC machines, metal alloys, die casting moulds, peripheral devices, joining processes, process optimization, energy efficiency, material testing, die casting machinery or 3D printing.
EUROGUSS is todays Europe's biggest and most important trade fair for the die casting industry. The event set new records in 2014 with 470 exhibitors and 11,187 trade visitors.
THE 2ND INTERNATIONAL AUTOMOTIVE CASTING CONFERENCE
July 7th , 2015, Shanghai, China Radisson Blu Hotel Pudong Century Park , Magnolia Hall
Automotive industry is counted as one of the biggest markets in the die casting and mould fields, with prominent advantages of its amounts, varieties, qualities and materials. The Chinese automotive industry is developing very fast these years and is forecasted to continue its growth furthermore, which makes it put into use in big scales. The reconstruction of this industry provides wider space for its future development in providing lighter auto parts which reflect the latest development and modern technologies in die casting industry.
Based on the Asia's biggest and most successful trade fair specializing in die casting industry - The 10th China International Die Casting Congress & Exhibition", "The 2nd International Automotive Casting Conference" was organized to feature the die casting solutions to meet the growing demands of the industry. Experts in the industry were invited to share their views and expertise focusing current issues of the sector on the different topics:
● Global market and trend of the manufacture of automotive parts
● Innovation on the design and production of automotive casting
● Technologies and solutions for automotive casting
Attendee profile:
● Automotive manufacturers
● Casting companies
● Casting solution providers
● Organizer:
NürnbergMesse FICMES
Please see the full program in our latest report about this event: goo.gl/D9JMKE
Asia Automotive Lightweight Procurement Symposium 2015 - organized by AluMag® Automotive GmbH
AUDI, GEELY and MAGNA together with DGS, Kurtz, Guangdong Hongtu, Kobelco, Sapa, Novelis, Strikowestofen, JSC and Voestalpine have presented their newest lightweight achievements and competences at the Asia Automotive Lightweight Procurement Symposium, which took place from the 6th - 8th of July 2015 at the Jumeirah Himalayas Hotel in Shanghai.
A long list of International as well as national automotive lightweight executives were attending the 2nd Automotive Lightweight Procurement Symposium. Beside a row of exiting speeches focused on the topics Automotive Lightweighting, supply chain and procurement management, the symposium was also an ideal location to interchange with executives from many leading OEMs and suppliers from all over the world.
The symposium was held in the days during the Aluminium China and China Diecasting shows, both taking place at the Shanghai New International Expo Centre which is located next to the symposium venue, Jumeirah Himalayas Hotel.
Please see the full program in our latest report about this event : goo.gl/uLJ1GT Coming soon: The complete presentations of the event very soon on www.Foundry-Planet.com
