The New Teli Bee – Flying with Sony’s latest CMOS Exmor® Global Shutter

Toshiba Teli launches the BU238M/MC USB3.0 camera with Sony’s IMX174 as the new standard in sensor technology

Taufkirchen, (PresseBox) - Made for high speed or low light factory automation or machine vision applications and using Sony’s first Global Shutter CMOS sensor inside, the new Bee Series sees Toshiba Teli as one of the first industrial camera suppliers to use the latest revolution in sensor technology.

The Exmor® Global Shutter with 2.4MP and full HD readiness enables distortion free images and has a peak quantum efficiency over 70%. The combination of Toshiba Teli’s USB3.0 interface and a frame rate of 165 fps provides one of the most appreciated advantages of the BU238M/MC - speed.

Based on Sony’s recently developed analog memory, storing light collected at the photodiode, shielding from sources of noise, a clean conversion leads to very high sensitivity. With short shutter times, higher frame rates and processing times the sensitivity enables greater dynamic range and lower power costs together with clean images. With the dynamic range in excess of 70dB and analog to digital noise cancelling technology there is no fixed pattern noise and a low read noise of 6e-.

Dr. Ronald Müller from FRAMOS, the European distributor for Toshiba Teli and Sony, summarizes the advantages of the new Teli BU238M/MC: “The speed of the machine vision application is distinctly increased. Combined with higher accuracy and efficiency through its increased sensitivity, the ultra-low noise and fast frame rates of the Teli BU238M/MC, the customer or system integrator has a very reliable high quality and compact camera!”

The Toshiba Teli BU238M/MC with Sony’s IMX174 inside is available from June 2014. A further 2 Toshiba Teli Bee Models will also be available at this time: The BU205M with 2MP CMOSIS sensor and the BU406M with 4MP CMOSIS sensor - both with excellent speed and resolution. With ultra-compact dimensions (29x29x16mm) the Teli Bee Series provides great design-in flexibility allowing customers to choose the best fitting solution from a wide range of cameras.

Website Promotion

FRAMOS GmbH

Founded in 1981, FRAMOS is a leading technology provider in the industrial, scientific and medical imaging sector. Headquartered in Munich, Germany, and with 5 subsidiaries worldwide we enable manufacturers, system integrators and researchers to benefit from imaging technologies. Our team of 60 employees provides a fully comprehensive portfolio of imaging components (image sensors, cameras, optics, illuminators, frame grabbers, etc.) with individual logistic services, technical consulting and after-sales support. Based on our deep industry knowledge we offer engineering services for tailored camera development as well as complete turn-key-solutions.

Press releases you might also be interested in

Subscribe for news

The subscribtion service of the PresseBox informs you about press information of a certain topic by your choice at a choosen time. Please enter your email address to receive the email with the press releases.

An error occurred!

Thank you! You will receive a confirmation email within a few minutes.


I want to subscribe to the gratis press mail and have read and accepted the conditions.