Aegis Software Enables Paperless Defect Mapping at Sechan Electronics

Horsham, PA, (PresseBox) - Sechan Electronics, Inc. is an established contract manufacturing services company committed to developing, testing and manufacturing military electronics systems and subsystems for the Department of Defense and Prime Contractors. Sechan's relationship with Aegis Software extends back over 11 years, beginning with their initial purchase of CircuitCAM and CheckPoint; software modules that are now integrated into iLaunch.

Accordingly, when Sechan need a replacement for their paper-based defect mapping process, they chose Aegis' Quality System - a decision that has paid off handsomely for the company. "We purchased Aegis CircuitCAM and Check Point initially for work instruction and machine program generation. Given the great performance of those products and Aegis we took the next step with their shop floor solutions" commented Matthew Leber, CCA Manager at Sechan, "I have been working in the electronic manufacturing field since 1990, and these products add up to the single greatest tool I have seen to drive process improvement. Defects are identified down to the pin level, while the Aegis software also includes traceability, part number association and numerous other valuable features."

The Aegis software solution, in Sechan's view, gives them a manufacturing operating system that fulfills their long-held strategic ambitions - and not just for real time control. They use the electronic data captured to calculate their DPMO levels and drive quality initiatives for continuous process improvement. All activities are supported by the software's automatic generation of standard reports, and custom reports can usually be produced in a few minutes. Additionally, reports triggered by real time events have proven extremely useful in ensuring that all personnel are notified immediately of any event affecting them.

Sechan's Aegis environment now extends to over 75 licenses covering NPI, manufacturing, inspection, test and quality functions for their entire production area. The company has also implemented Aegis xLink technology to electronically capture data from Viscom AOI and AXI systems as well as flying probe and in circuit test equipment to complement their manual data collection. The Aegis installation covers Sechan's 120,000 square foot facility, which now houses three surface mount lines, one wave solder and one selective solder process. Production activities include circuit card assembly, cable and wire harness assembly, and electro-mechanical assembly.

This environment of extensive manufacturing information and 'on demand' paperless reporting contrasts greatly with the setup it replaced. Data from the previous QA system was weak, with limited reference pointers. Deriving reports was a cumbersome exercise, with no drill down or useful data provided. These drawbacks made driving process improvements difficult and time consuming.

Aegis software is regarded by Sechan as a comprehensive, well-integrated system that accomplishes their goals in an easy and user-friendly format. Personnel from their Manufacturing Engineering, QA and IT departments participated in the implementation effort, using phone support from Aegis when small issues arose. Sechan feels that Aegis has always been quick to investigate any such issues, resolving these with appropriate fixes. Aegis deployment engineers assisted with the initial training for, and implementation of automated report generation, xLink connections with the AOI and test systems, and general system checks as needed in an efficient, cost effective manner.

Sechan's Quality Management system is in full compliance with AS9100:2009 and ISO 9001:2008, with demonstrated CMMI Level 3 capabilities. In the future, Sechan intends to make further use of Aegis in refining its quality environment. Dashboards will display production and quality metrics as actionable data for the operators on the factory floor. The company also plans to expand the capture of other critical quality and test data to further reduce the number of disparate data sources in the factory; reports and metrics will become available from one integrated manufacturing solution.

Aegis Software

Aegis Software provides single-vendor information systems for high-reliability manufacturers, providing a critical complement to enterprise-level ERP and PLM capabilities. Aegis' Manufacturing Operations Software (MOS) fully manages the manufacturing information environment, from process planning and launch, quality and test management, through manufacturing execution and shop floor materials control, to operations analytics and real-time dashboard systems. www.aiscorp.com

Press releases you might also be interested in

Weitere Informationen zum Thema "Software":

Diese ERP- und CRM-Trends bewegen den Mittelstand 2018

Was in vie­len US-Kon­zer­nen und DAX-Un­ter­neh­men längst zum Stan­dard ge­hört, ist im Jahr 2018 auch zu­neh­mend The­ma bei deut­schen Mit­tel­ständ­lern. So öff­nen sich klei­ne und mit­tel­stän­di­sche Un­ter­neh­men (KMU) im­mer mehr der Hy­brid Cloud und Soft­wa­re-as-a-Ser­vices (SaaS).

Weiterlesen

Subscribe for news

The subscribtion service of the PresseBox informs you about press information of a certain topic by your choice at a choosen time. Please enter your email address to receive the email with the press releases.

An error occurred!

Thank you! You will receive a confirmation email within a few minutes.


I want to subscribe to the gratis press mail and have read and accepted the conditions.