With its SPECTRAN® V6 X, Aaronia is setting new standards in real-time spectrum analysis. While an acquisition bandwidth of 40 MHz was previously standard, Aaronia has developed the world's first 6GHz USB spectrum analyser with 245 MHz true I/Q streaming, thus increasing the real-time bandwidth by six times. Also record breaking is the small POI (Probability Of Intercept) of up to 10ns, so the SPECTRAN® V6 X captures signals that are 1,000 times shorter than conventional spectrum analysers. These usually reach their limits at a minimum signal duration of 100 µs for 100 percent probability of detection. In addition, an integrated vector signal generator/tracking generator with a modulation bandwidth of up to 120 MHz (opt. 245 MHz) is used in the SPECTRAN® V6 X, which considerably increases the range of operation.
With its latest spectrum analysers, Aaronia continues its successful SPECTRAN® series of high-performance real-time spectrum analysers in the 6th generation. With a sweep speed of over 1THz/s, the SPECTRAN® V6 X shortens the cycle time of the currently fastest spectrum analysers by a factor of 40. With this, Aaronia once again sets a new benchmark in the USB compact class segment.
In addition, it is possible to cascade any number of devices to achieve an even higher real-time bandwidth. For example, four SPECTRAN® V6 X units are sufficient to achieve a real-time bandwidth of 1GHz.
The spectrum analyser comes with the latest version of the RTSA Suite PRO software. It is currently the most powerful and one of the most multifunctional spectrum analysis software solutions on the market and leaves no wishes unfulfilled. The number of visualisation and analysis options is constantly being expanded thanks to the ongoing further development of the software. Aaronia continuously provides updates in the download section created especially for this purpose. This is supplemented by the SPECTRAN® V6 Forum, where all the latest information on the RTSA-Suite PRO software is always available.
In this way it is ensured that the supplied software optimally supports the powerful and robust hardware. For example, the RTSA-Suite PRO software is suitable for the simultaneous use of several SPECTRAN® V6 X units. The stackable aluminium housing facilitates the parallel use of several units.
- Frequency range: 10MHz to 6GHz (opt. 8GHz)
- Multiple units cascadable (increase real-time bandwidth)
- Unlimited continuous 245MHz True I/Q streaming via USB
- Dual receiver real-time bandwidth of 245MHz (2x245MHz)
- 120MHz I/Q vector signal generator (opt. 245MHz)
- Sweeps 6GHz in less than 5ms (1THz/s)
- Parallel measurement of multiple frequency bands
- POI up to 97ns (FFT-based)
- POI up to 10ns (I/Q-based)
- Exceptional dynamic range using over 18 bandpass filters and a 16-bit ADC with 2GSPS
- Sample rate: 500 MSPS (16-bit dual 256 MSPS I/Q data)
- FPGA: 930GMAC/s
- FFT rate: 960 million FFT points/s (120 million FFTs/s)
- MATLAB support
- Stackable accessories
- Lightweight and compact
- Includes RTSA-Suite PRO software with daily updates
- Made in Germany
The SPECTRAN® V6 X will initially be delivered in three versions: V6-RSA250X, V6-RSA500X and V6-RSA2000X - with a RTBW (Real-Time Bandwidth) of up to 245MHz. The analysers are compatible with all current Aaronia antennas.
With its latest spectrum analysers, Aaronia continues its successful SPECTRAN® series of high-performance real-time spectrum analysers in the 6th generation. With a sweep speed of over 1THz/s, the SPECTRAN® V6 X shortens the cycle time of the currently fastest spectrum analysers by a factor of 40. With this, Aaronia once again sets a new benchmark in the USB compact class segment.
In addition, it is possible to cascade any number of devices to achieve an even higher real-time bandwidth. For example, four SPECTRAN® V6 X units are sufficient to achieve a real-time bandwidth of 1GHz.
The spectrum analyser comes with the latest version of the RTSA Suite PRO software. It is currently the most powerful and one of the most multifunctional spectrum analysis software solutions on the market and leaves no wishes unfulfilled. The number of visualisation and analysis options is constantly being expanded thanks to the ongoing further development of the software. Aaronia continuously provides updates in the download section created especially for this purpose. This is supplemented by the SPECTRAN® V6 Forum, where all the latest information on the RTSA-Suite PRO software is always available.
In this way it is ensured that the supplied software optimally supports the powerful and robust hardware. For example, the RTSA-Suite PRO software is suitable for the simultaneous use of several SPECTRAN® V6 X units. The stackable aluminium housing facilitates the parallel use of several units.
- Frequency range: 10MHz to 6GHz (opt. 8GHz)
- Multiple units cascadable (increase real-time bandwidth)
- Unlimited continuous 245MHz True I/Q streaming via USB
- Dual receiver real-time bandwidth of 245MHz (2x245MHz)
- 120MHz I/Q vector signal generator (opt. 245MHz)
- Sweeps 6GHz in less than 5ms (1THz/s)
- Parallel measurement of multiple frequency bands
- POI up to 97ns (FFT-based)
- POI up to 10ns (I/Q-based)
- Exceptional dynamic range using over 18 bandpass filters and a 16-bit ADC with 2GSPS
- Sample rate: 500 MSPS (16-bit dual 256 MSPS I/Q data)
- FPGA: 930GMAC/s
- FFT rate: 960 million FFT points/s (120 million FFTs/s)
- MATLAB support
- Stackable accessories
- Lightweight and compact
- Includes RTSA-Suite PRO software with daily updates
- Made in Germany
The SPECTRAN® V6 X will initially be delivered in three versions: V6-RSA250X, V6-RSA500X and V6-RSA2000X - with a RTBW (Real-Time Bandwidth) of up to 245MHz. The analysers are compatible with all current Aaronia antennas.
