Suche: Pressemitteilung "Munich"

SPAD Arrays for Flash LiDAR

• 2019-01-29
• Photonics
• LASER COMPONENTS GmbH

With the SPAD2L192, LASER COMPONENTS now also offers a solid-state CMOS sensor for Flash LiDAR applications. With a resolution of 192 x 2 pixels, the single photon avalanche diode (SPAD) array offers very high sensitivity and high temporal resolution. The noise is below 50 cps. The in-pixel time-to-digital converter, which features a temporal resolution... go to press release

---

Suche: Pressemitteilung "Munich"

Autonomous System Measures the Smallest Signal Dropouts

• 2019-01-22
• Photonics
• LASER COMPONENTS GmbH

With the OP1100 discontinuity analyzer, LASER COMPONENTS presents an autonomous test system for detecting and recording dropouts in optical data transmission. The OptoTest device detects signal fluctuations of 0.5 dB and a duration of 0.8 μs. Up to 24 single-mode or multi-mode fibers can be monitored simultaneously. The events are recorded in a fast,... go to press release

---

Suche: Pressemitteilung "Munich"

Custom High-Performance Diffractive Scattering Optics

• 2018-12-11
• Photonics
• LASER COMPONENTS GmbH

Thanks to an innovative production process, LASER COMPONENTS can now offer custom high-performance broadband diffusers manufactured by our supplier Holo/OR at a low price. These scatter filters cover a wavelength range from UV to NIR and are specifically designed for high-power laser applications that use multiple wavelengths in the same optical path.... go to press release

---

Suche: Pressemitteilung "Munich"

Fast and Easy M2 Measurement

• 2018-12-04
• Photonics
• LASER COMPONENTS GmbH

With the Beamage-M2, Gentec-EO has now introduced an automated system that can determine the quality of a laser beam in only 20 to 60 seconds by means of an M2 measurement. Available exclusively from LASER COMPONENTS, this system is the only one in the world with a complete set of 50 mm optics. This allows measurements to be made on larger beam diameters... go to press release

---

Suche: Pressemitteilung "Munich"

Temperature and Stress Measurement in Optical Networks

• 2018-11-27
• Photonics
• LASER COMPONENTS GmbH

Viavi Solutions is the only manufacturer which has developed a BOTDR system that is able to determine if a change in the Brillouin scattering in an optical network has been caused by stress or a change in temperature. Even over long distances, these anomalies can be localized at an accuracy of a few meters. At LASER COMPONENTS, these measuring instruments... go to press release

---

Suche: Pressemitteilung "Munich"

Optomechanical Structures in Three Dimensions

• 2018-11-06
• Photonics
• LASER COMPONENTS GmbH

LASER COMPONENTS offers a new mounting system that allows optical alignment in three dimensions, an addition to the BreadBox optomechanics family from 3D Optix. Its modular concept comprising floor/ceiling elements, walls and extension parts is easy to use and understand. Any complex structures that take up considerably less space than conventional... go to press release

---

Suche: Pressemitteilung "Munich"

The Role of Fiber Optics in a Connected World

• 2018-10-25
• Photonics
• LASER COMPONENTS GmbH

The Fiber Optics Symposium at LASER COMPONENTS has always been an indicator for current trends in the fiber optics community. On October 18, approximately 50 experts met once again in Olching near Munich to discuss the technological, political and economic framework of their industry. Contributions and discussions were dominated by two topics: The... go to press release

---

Suche: Pressemitteilung "Munich"

Two Strong Partners for the LiDAR Technology of the Future

• 2018-10-18
• Photonics
• LASER COMPONENTS GmbH

LASER COMPONENTS and the Fraunhofer Institute for Microelectronic Circuits and Systems IMS have signed a cooperation agreement and will collaborate closely in the future. Especially in the field of LiDAR technologies, both partners promise fresh impetus. Regarding components for the automotive industry, LASER COMPONENTS has made a name for itself primarily... go to press release

---

Suche: Pressemitteilung "Munich"

Don't Care! Be Square!

• 2018-10-11
• Photonics
• LASER COMPONENTS GmbH

At Vision 2018 (Messe Stuttgart, 6 - 8 November), LASER COMPONENTS is proud to present the first FLEXPOINT line laser module in a square casing (L x W x H: 65 x 15 x 15mm). This latest addition to the FLEXPOINT MV series was designed for quick and easy installation during series production of 3D systems for industrial image processing. Focus, beam position... go to press release

---

Suche: Pressemitteilung "Munich"

Power Meter with 125,000 Samples per Second

• 2018-10-02
• Photonics
• LASER COMPONENTS GmbH

With the OP740 from OptoTest, LASER COMPONENTS offers a high-speed solution for measuring the power of optical fibers from multiple channels. This device makes it possible to measure up to 125,000 samples per second with up to twenty-four fibers. In contrast to other systems, a separate, independent measuring unit is used for each fiber. This not only... go to press release

Für die oben stehenden Pressemitteilungen, das angezeigte Event bzw. das Stellenangebot sowie für das angezeigte Bild- und Tonmaterial ist allein der jeweils angegebene Herausgeber (siehe Firmeninfo bei Klick auf Bild/Meldungstitel oder Firmeninfo rechte Spalte) verantwortlich. Dieser ist in der Regel auch Urheber der Pressetexte sowie der angehängten Bild-, Ton- und Informationsmaterialien.
Die Nutzung von hier veröffentlichten Informationen zur Eigeninformation und redaktionellen Weiterverarbeitung ist in der Regel kostenfrei. Bitte klären Sie vor einer Weiterverwendung urheberrechtliche Fragen mit dem angegebenen Herausgeber. Bei Veröffentlichung senden Sie bitte ein Belegexemplar an service@pressebox.de.