Robust measurement and calibration equipment for the process industry, in combination with calibration certificates

Process calibrators PC-HA und multi function calibrator PC-MF

Neustadt, (PresseBox) - In order to serve the high standards of measurement and calibration instruments in harsh process environments, Müller Industrie-Elektronik has been launched the new family of extremely robust process calibrators. The devices of this produkt line newly placed on the market, have a very attractive price and are offered as compact instruments type PC-HA as well as multifunction device PC-MF.

The smaller compact calibrators are available for measuring ranges voltage/current, resistance thermometer/resitor, thermocouple/voltage and temperature source (thermocouple, resistance thermometer, resitor und voltage) and are all characterized by a high accuracy (e.g., in output DC ampere ±0.05% of set value with ±4µA). They are battery operated with a continuous operating time of approximately 12 hours at 10 mA and can be used in ambient temperatures between 0 and 50 ° C at humidity of max 80% RH.

As a top unit of the product group, the multifunction process calibrator PC-MF is available which covers all measuring areas of the small calibrators in one device. The PC-MF is a likewise batteryoperated instrument which can be used as a measuring instrument and transducer for the most different electric and physical parameters. Thus, the device covers all measuring ranges and output sources like, voltage, current, resistor, frequency, thermocouple, resistance thermometer, pulse and pressure and is characterized by highest accuracy at the same time.

In addition to these measuring functions, the PC-MF has other functional features:

- You can operate the measurement and source function simultaneously. The LCD screen is divided into two separate areas, whose upper part displays measurement information and the lower part displays source information

- TC measurement/source terminals and builtin lead connector have available RJ compensation with autoreference joint point

- Manual step source and autostep and sweepingstep source

- Room temperature monitoring at any mode

- Measurement/source temperature monitoring function

- Measurement/source mA/percent display

- Measurement wave filter function

- Measurement manual holding function

- Pressure source auto holding function

The characteristics of the PC-MF are based on those of compact calibrators with a process operation time in 9 V battery operation of approx. 12 hours at operating temperatures between 0 to 50°C. The dimensions in the transport pocket, contained in the scope of supply, are 200x175x60 mm with approx. 850 g weight for the compact devices PC-HA (size and weight calibrator: 205x100x45mm, 550g). The multifunction calibrator PC-MF is 220x175x60mm in size and 1100g light inside the bag (device: 205x95x45mm, 610g). All device cases are made of sturdy plastic in a shockresistant hard rubber protective covering.

Niche product:

As a niche product in the category of calibrators, Müller Industrie-Elektronik provides the strain gauge simulator SGS-HA specifically for the strain gauge force measurement. Output resistance 390 ohms, input by bridge supply from 5 to 10VDC and output 0 to 50 mV with an accuracy of up to 0.01% of FS.

Advantage of product and service from one source:

In the complete package, as a service to all Müller Industrie-Elektronik devices, as well as for measurement and calibration equipment from other manufacturers, different calibrations can be carried out. As lowcost variant, a factory calibration, even at the customer site, and differentiated according to the guidelines of the "Deutscher Kalibrierdienst" with certified DKD-5 calibration and calibration mark.


Battery supply: 9 V (ANSI/NFDA 1604A / IEC 6LR619V Alkaline)
Battery life: approx. 12 hours at 10 mA
Maximum voltage: 30 V (between 2 terminals or 1 terminal and ground)
Ambient temperature: operation: 0...50 °C / storage: -10...55 °C
Air humidity operation: max. 80% RH / storage: maximum 90% RH
Dimensions: 200 x 100 x 40 mm (with carrying case)
Weight: approx. 550 g (with carrying case)
Accessories: manual, 1 set measuring cable
Standards: according IEC1010 (EN61010)

Press releases you might also be interested in

Weitere Informationen zum Thema "Electrical Engineering":

Neue Herausforderungen bei IoT, Security und KI

Im Jahr 2018 wer­den an­spruchs­vol­le IoT-An­wen­dun­gen die Gren­zen der Da­ten­ver­ar­bei­tung wei­ter ver­schie­ben und IT-Si­cher­heits­for­scher ver­stärkt selbst ins Vi­sier ge­ra­ten. Au­ßer­dem wird man ma­schi­nel­lem Ler­nen und künst­li­cher In­tel­li­genz mit we­ni­ger Skep­sis be­geg­nen.


Subscribe for news

The subscribtion service of the PresseBox informs you about press information of a certain topic by your choice at a choosen time. Please enter your email address to receive the email with the press releases.

An error occurred!

Thank you! You will receive a confirmation email within a few minutes.

I want to subscribe to the gratis press mail and have read and accepted the conditions.