33VIN, 3.5A(IOUT), 2.4MHz Step-Down DC/DC Converter Draws Only 75uA of Quiescent Current & Withstands 62V Transients

(PresseBox) ( MILPITAS, CA, )
Linear Technology Corporation announces the LT3972, a 3.5A, 33VIN step-down switching regulator with Burst Mode® operation to keep quiescent current under 75uA. The LT3972 operates within a VIN range of 3.6V to 33V, with overvoltage lockout protection against transients as high as 62V, making it ideal for load dump and cold-crank conditions commonly found in automotive applications. Its internal 4.6A switch can deliver up to 3.5A of continuous output current at voltages as low as 0.79V. Its Burst Mode operation provides ultra-low quiescent current, well suited for applications such as automotive or telecom systems, which have always-on circuits and need to optimize battery life. Switching frequency is user programmable from 200kHz to 2.4MHz, enabling the designer to maximize efficiency while avoiding critical noise-sensitive frequency bands. Its 3mm x 3mm DFN-10 package (or thermally enhanced MSOP-10E) and high switching frequency keep external inductors and capacitors small, providing a compact, thermally efficient footprint.

The LT3972 utilizes a high efficiency 4.6A, 95mOhm switch, with the necessary boost diode, oscillator, control and logic circuitry integrated into a single chip. Low ripple Burst Mode operation maintains high efficiency at low output currents while keeping output ripple below 15mVPK-PK. Special design techniques used in the LT3972 enable high efficiency over a wide input voltage range, and the device's current mode topology enables fast transient response and excellent loop stability. Other features include external synchronization (from 250kHz to 2MHz), a power good flag and soft-start capability.

The LT3972IDD and LT3972IMSE are guaranteed to operate from a -40°C to 125°C operating junction temperature. All versions are available from stock.

Summary of Features: LT3972
- Wide Input Range:
- Operation from 3.6V to 33V
- Overvoltage Lockout Protects Circuits Through 62V Transients
- 3.5A Maximum Output Current
- Low Ripple (<15mVP-P) Burst Mode® Operation:
- IQ = 75uA at 12VIN to 3.3VOUT
- Adjustable Switching Frequency: 200kHz to 2.4MHz
- Low Shutdown Current: IQ < 1uA
- Integrated Boost Diode
- Synchronizable Between 250kHz to 2MHz
- Power Good Flag
- Saturating Switch Design: 95mOhm On-Resistance
- Output Voltage: 0.79V to 30V
- Thermal Protection
- Soft-Start Capability
- Small 10-Pin Thermally Enhanced MSOP & (3mm × 3mm
Für die oben stehenden Pressemitteilungen, das angezeigte Event bzw. das Stellenangebot sowie für das angezeigte Bild- und Tonmaterial ist allein der jeweils angegebene Herausgeber (siehe Firmeninfo bei Klick auf Bild/Meldungstitel oder Firmeninfo rechte Spalte) verantwortlich. Dieser ist in der Regel auch Urheber der Pressetexte sowie der angehängten Bild-, Ton- und Informationsmaterialien.
Die Nutzung von hier veröffentlichten Informationen zur Eigeninformation und redaktionellen Weiterverarbeitung ist in der Regel kostenfrei. Bitte klären Sie vor einer Weiterverwendung urheberrechtliche Fragen mit dem angegebenen Herausgeber. Bei Veröffentlichung senden Sie bitte ein Belegexemplar an service@pressebox.de.