KARL MAYER is giving the market for spacer textiles a boost with the RDJ 5/1 and RD 7/2-12, especially in shoe fabric sector

Obertshausen, (PresseBox) - Warp-knitted spacer textiles are continuing to make headway. Breathable, tough and stylish, they are increasingly taking over from flat fabrics in the shoe fabric sector, but these functional spacer textiles have also become an integral part of mattresses. They are ideal for use in the ventilation zones in the side borders, as soft covers, or as functional partners in multilayered foam constructions. Clothing manufacturers have also discovered the advantages of warp-knitted spacer textiles. The technical features of 3D fabrics in outdoor clothing provide an extravagant look, climatic comfort and new, haptic experiences.

This trend towards warp-knitted spacer textiles has been spurred on by the availability of a wide range of products at competitive prices, which are produced on flexible and efficient machines. 3D warp-knitted textiles are produced on double-bar raschel machines. The machines produced by KARL MAYER, the world leader in this field, are extremely innovative. This innovative company will launch two new machines onto the market in spring 2015. These are the RDJ 5/1, with which the company is following its twin product line strategy in the double-bar raschel machine sector, and the RD 7/2-12 EN, on which patterning based on chain links has been replaced by a system offering greater speed and flexibility.

Launch to take place in China, the most active market

The RD 7/2-12 EN and the RDJ 5/1 will be presented to a wider group of specialists, invited by KARL MAYER (China) Ltd., to an open-house event scheduled for 22 and 23 January 2015. During this machine show, the new machines in the RD series will be working patterns for the shoe sector in particular, and will be demonstrating all of their many features.

The RDJ 5/1 - a basic machine for simple jacquard-patterned spacer fabrics

Warp-knitted spacer textiles patterned with jacquard designs are products showing a real growth potential. Shoe manufacturers in particular are becoming increasingly interested in spacer fabrics with their wide range of different designs. They are creating a demand that has led to textile producers investing continuously in new, innovative production machinery, especially in Taiwan, Korea and China, the main manufacturing countries. As a result of this expansion and renewal of capital, KARL MAYER's RDPJ 7/1 has become firmly established as an efficient, flexible machine. This tried-and-tested, high-tech model now has a sister machine in the basic machine segment. This new machine is known as the RDJ 5/1 and is continuing KARL MAYER's twin product line strategy for its RD machine series. It offers manufacturers of warp-knitted spacer textiles competitive advantages in a variety of applications, but its cost:benefit ratio was designed especially to meet the requirements of the shoe fabric market in China. With two guide bars fewer than the RDPJ 7/1, the RDJ 5/1 offers adequate patterning possibilities for designing shoes and a high level of efficiency at the same time. The configuration and features of the machines are also different. Whereas the RDPJ 7/1 can either be supplied with N or EL guide bar control, the RDJ 5/1 is available with N pattern drive only. The width and distance between the trick plates on both machines are the same and the available gauges typical of the machines. The RDJ 5/1 is available in gauges E 22 and E 24 and the RDPJ 7/1 EL is available in gauges E 24 and E 28. Delivery of the first new machine is scheduled for spring 2015.

The RD 7/2-12 EN - an efficient, all-round machine, thanks to the electronic pattern drive

The RD 7/2-12 offers maximum design possibilities and can therefore produce a wide range of different products. With this specific feature, this sturdy, all-round machine is mainly used by shoe fabric manufacturers operating the N drive version. Complex designs are frequently not worked with pattern discs but with pattern chains, which involves a loss of productivity. There is now an alternative to this, i.e. a new electronic guide bar drive offering the flexibility of pattern discs and chains at a lower cost than the conventional EL pattern drive.

The basic EL pattern drive, with its excellent cost:benefit ratio, is now available for the new RD 7/2-12 EN for the first time. Its advantages are:

1. Precision shogging movement just like the mechanical drive but with the advantage that the pattern can be changed very quickly, thanks to the computer control facility - and this also applies when working conventional designs having long repeats.

2. Elimination of the time-consuming handling procedures when changing long pattern chains, and the costs involved in acquiring and storing the pattern discs if these were being used for controlling the guide bars.

3. Operation of the machine at maximum speed, in contrast to working with pattern chains. The new EL system increases the productivity, measured in courses/minute, by up to 33%.

The modified arrangement of the guide bars has enabled this new machine to work at this increased productivity level and in addition it also runs quietly and smoothly. All this has been achieved at a competitive price. This machine, with its excellent cost:benefit ratio, is available in a working width of 138". The distance between the trick plates can be adjusted from 2 to 12 millimetres. The first RD 7/2-12 EN is scheduled for delivery in the spring of 2015.

Press releases you might also be interested in

Subscribe for news

The subscribtion service of the PresseBox informs you about press information of a certain topic by your choice at a choosen time. Please enter your email address to receive the email with the press releases.

An error occurred!

Thank you! You will receive a confirmation email within a few minutes.


I want to subscribe to the gratis press mail and have read and accepted the conditions.