Smart LUA script processing, bi-directional MQTT messaging and new hardware added to the Ixxat CAN@net NT and CANbridge series

(PresseBox) ( Karlsruhe, )
With the new Service Pack 2, HMS Networks extends the functionality of the Ixxat® CAN@net NT and CANbridge NT series. Users can now add smart, event-controlled network actions and versatile bi-directional MQTT-messaging to cloud applications. The new hardware CAN@net NT 100 complements the CAN@net NT range with new network connectivity.

The Ixxat® CAN@net NT and CANbridge NT product families enable smart and seamless CAN-based networking on-site and remotely. The CANbridge NT enables easy coupling of up to four CAN and CAN-FD networks using filter and translation rules. Network wiring can be simplified through tree and star topologies, and all connected segments are protected thanks to electrically isolated bus interfaces. All CAN@net NT products come with an additional Ethernet interface, allowing very distributed networks by coupling up to four CAN@net NT devices using Ethernet. CAN@net NT products also allow remote access to CAN and CANFD networks via Ethernet and PC.

New SP2 functionality powers up the CAN@net NT and CANbridge series

The new Service Pack 2 introduces enhanced "Action Rules" programming for flexible definition and execution of events and actions for all CAN@net NT and CANbridge products. Based on LUA script processing, these user-defined actions can be triggered upon e.g. pre-defined message content or status information.

The Ethernet interface of the CAN@net NT series enables direct cloud connectivity via the implemented MQTT protocol. In SP2, bi-directional MQTT messaging is introduced. In addition to transmitting e.g. alarms and status information to mobile devices, messages can now also be received from the cloud for LUA scriptbased pre-processing, plausibility checking and transmission to the CAN bus.

CAN@net NT 100 – new connectivity

HMS also introduces a new hardware – CAN@net NT 100 – that offers a D-Sub 9 network connector for CAN/CAN-FD network connectivity, complementing the existing CAN@net NT 200 and 420 products that both feature screw terminals. The CAN@net NT 100 is a direct successor of the older CAN@net II which means that existing customers can exchange installed CAN@net II units in existing systems with CANnet 100 NT and benefit from all the new functionality provided in SP2.

Learn more about the new Service Pack 2 functionality and CAN@net NT 100 at www.ixxat.com/bridges 
Für die oben stehenden Pressemitteilungen, das angezeigte Event bzw. das Stellenangebot sowie für das angezeigte Bild- und Tonmaterial ist allein der jeweils angegebene Herausgeber (siehe Firmeninfo bei Klick auf Bild/Meldungstitel oder Firmeninfo rechte Spalte) verantwortlich. Dieser ist in der Regel auch Urheber der Pressetexte sowie der angehängten Bild-, Ton- und Informationsmaterialien.
Die Nutzung von hier veröffentlichten Informationen zur Eigeninformation und redaktionellen Weiterverarbeitung ist in der Regel kostenfrei. Bitte klären Sie vor einer Weiterverwendung urheberrechtliche Fragen mit dem angegebenen Herausgeber. Bei Veröffentlichung senden Sie bitte ein Belegexemplar an service@pressebox.de.