Engineered Material Systems to Showcase Adhesives for Stringing and Shingling Next-Generation Solar Modules at Intersolar North America
The EMS 561-400 series is designed to be used in modified ribbon stringers. The material will snap cure and fixture ribbons in seconds at 150°C with enough strength to withstand module manufacturing processes until the adhesive cure is completed during the encapsulant lamination process. EMS 561-400 series conductive adhesives can be dispensed by time-pressure, auger or jetting.
The adhesive is more stress absorbing than solder to withstand the rigors of thermal cycling and processes at lower temperatures than solder. EMS 561-400 series conductive adhesives are 60 percent less expensive than pure silver-filled conductive adhesives.
For more information about EMS’ low cost conductive adhesives or to learn how the company can define, develop and create an engineered material solution that is right for your company, meet with company representatives in Booth #7738 at Intersolar North America or visit www.emsadhesives.com.
Engineered Materials Systems
Engineered Materials Systems, Inc. (EMS) technology focus is on electronic materials for semiconductor, circuit assembly, photovoltaic, printer head, camera module, disk drive and photonics assembly product lines. The company creates continual improvements that will guide its customers into the future. For more information, visit www.emsadhesives.com.