Series LD and LT pancake load cells with analog and digital outputs

(PresseBox) ( Milano, )
Industrial machine manufacturers often need to measure forces and weights with load cells that have a small overall highness together with high resolution and long distance data transmission in electrically noised environments.
DS Europe has been manufacturing transducers for 30 years and is proposing load cells series LD (compression) and LT (tension and compression) to satisfy these needs.
Load cells series LD and LT are rugged and could have a built-in analog or digital electronics that allows high protection against electrical noise, high resolution, to transmit the measure far away in electrically noised environments and are pre-calibrated therefore allowing an easy installation and service.

Series LD and LT are for industrial use and have the following features:
Measuring ranges:
- Series LT from 0 to ±10Kg up to 30tons (compression).
- Series LD from 0 to +10Kg up to 300tons (tension and compression).
Accuracy: 0,2%FS; Environment protection: IP65.
Analog outputs: 2mV/V, ±5V, ±10V e 4-20mA ( 2 wires ).
Digital outputs: CAN open (profile DSP406), RS485 and RS422 (DSEnet and Modbus protocols).

Digital electronics features:

High resolution (24bit max. A/D converter) , differential data transmission (protection against electrical noise and distant data transmission), fast measures (up to 960Hz max. sampling rate), engineering unit data transmission , easy and cost saving electrical connection (32 load cells in parallel with RS422 or RS485 and more than 100 linked nodes with CANopen onto a single cable), digital filter, high accuracy.

Main applications:

Automation, force measures onto presses and machine tools, weighing (tanks, hoppers etc.), textile machines, food machines, converting machines, vehicles, agriculture machines, elevators, marble machines, ceramic machines for wood/rubber/plastics/paper working etc.

DS Europe can produce standard as well custom measuring systems.
Für die oben stehenden Pressemitteilungen, das angezeigte Event bzw. das Stellenangebot sowie für das angezeigte Bild- und Tonmaterial ist allein der jeweils angegebene Herausgeber (siehe Firmeninfo bei Klick auf Bild/Meldungstitel oder Firmeninfo rechte Spalte) verantwortlich. Dieser ist in der Regel auch Urheber der Pressetexte sowie der angehängten Bild-, Ton- und Informationsmaterialien.
Die Nutzung von hier veröffentlichten Informationen zur Eigeninformation und redaktionellen Weiterverarbeitung ist in der Regel kostenfrei. Bitte klären Sie vor einer Weiterverwendung urheberrechtliche Fragen mit dem angegebenen Herausgeber. Bei Veröffentlichung senden Sie bitte ein Belegexemplar an service@pressebox.de.