Contact
QR code for the current URL

Press release Box-ID: 530933

Dr. Boy GmbH & Co. KG Neschener Straße 6 53577 Neustadt, Germany http://www.dr-boy.de
Contact Mr Thomas Breiden +49 2683 3070
Company logo of Dr. Boy GmbH & Co. KG
Dr. Boy GmbH & Co. KG

BOY XS - great showing planned at MICRONORA 2012

(PresseBox) (Neustadt-Fernthal, )
The BOY XS, the smallest BOY injection moulding machine, will be presented at the MICRONORA international micro technology fair in Besancon, France from the 25th to the 28th of September. In the booth of their French distributor béwé-plast S.A. the BOX XS (clamping force 100 kN) will demonstrate its full capability and resilience.

During the precise production of micro parts, the 12mm plasticizing unit is enormously advantageous. Small injection volumes of up to 0,1 cm³ can be dosed precisely with exacting repeatability. The dynamics of the injection behavior is very high. Due to a small screw diameter and optimized screw geometry, the dwell time of the plastic in this plasticizing unit is reduced about 50 % when compared with the 14mm plasticizing unit. A decrease of the thermal load of the material is achieved. Therefore, the variety of workable materials is expanded and technically sophisticated plastics can be used. Precision and quality consistency are clearly improved.

Attention should be paid to the ultra-compact dimensions of the BOY XS. With a footprint of only 0,8 m² (0,64 m² for the BOY XS V) and a clamping force of 100 kN, it is ideally suited for micro injection moulding and sprueless single cavity moulding. The multi-patented high end Procan ALPHA control, equipped with a touch-screen, fulfills the maximum requirements for ease of use, speed and precision.

Dr. Boy GmbH & Co. KG

Dr. Boy GmbH & Co. KG is one of the leading worldwide manufacturers of injection moulding machines with clamping forces below 1,000 kN. Its precision, compact design, and attractive cost/performance ratio characterize the BOY product line. With innovative concepts and solutions, BOY sets new standards. Since the company was founded in 1968, 40,000 injection moulding machines have been delivered worldwide. The privately owned company continues to put special emphasis on engineering performance and high-class "made in Germany" workmanship.

The publisher indicated in each case is solely responsible for the press releases above, the event or job offer displayed, and the image and sound material used (see company info when clicking on image/message title or company info right column). As a rule, the publisher is also the author of the press releases and the attached image, sound and information material. The use of information published here is generally free of charge for personal information and editorial processing. Please clarify any copyright issues with the stated publisher before further use. In case of publication, please send a specimen copy to service@pressebox.de.
Important note:

Systematic data storage as well as the use of even parts of this database are only permitted with the written consent of unn | UNITED NEWS NETWORK GmbH.

unn | UNITED NEWS NETWORK GmbH 2002–2022, All rights reserved

The publisher indicated in each case is solely responsible for the press releases above, the event or job offer displayed, and the image and sound material used (see company info when clicking on image/message title or company info right column). As a rule, the publisher is also the author of the press releases and the attached image, sound and information material. The use of information published here is generally free of charge for personal information and editorial processing. Please clarify any copyright issues with the stated publisher before further use. In case of publication, please send a specimen copy to service@pressebox.de.