A handful of BOYs

BOY to demonstrate five machines at the Plast 2012

Neustadt-Fernthal, (PresseBox) - Five BOY machines with interesting applications will be presented at this international event. With two BOY XS machines, two BOY E-Series machines and one insert moulding machine, a handful of BOY machines will be shown at the plastic fair in Milan (May 8-12) in Hall 24 / Booth B25.

A high-speed application will be demonstrated on a BOY 55 E (550 kN clamping force) equipped with a servo drive. The many advantages of the servo drive will become obvious with this application. Since the introduction of the servo motor pump drive in 2008, more and more users have selected these energy efficient E-Series machines from BOY. A savings from lower energy consumption is realized with every injection cycle. Due to energy savings of up to 75 % when compared to other drive technologies, the BOY E-Series machines can reduce part costs considerably.

The BOY 35 E (350 kN clamping force) is the most compact machine in its tonnage category. The BOY 35 E offers generously spaced tie bar and platen distances and has a footprint of only 1,9 m². During the PLAST 2012, the BOY 35 E will produce rubber O-rings. A parts removal device will be safely positioned right above the clamping unit.

The insert moulding of metal parts will be demonstrated on a BOY 22 A VV (clamping force 220 kN), which is configured with a vertical clamping and vertical injection unit. Hexagon shaped metal screws will be inserted into a two-cavity mould and injected onto a t-handle. The BOY 22 A VV features a fixed lower platen, so part placement is always secure. The machine has generous tie bar spacing and its design is ideal for automation.

The sprueless production of parts will be shown on a BOY XS (100 kN clamping force). Another BOY XS will demonstrate a liquid silicone rubber (LSR) application. The BOY XS, which is the smallest machine in the BOY product offering, is designed for an industrial 24/7 production environment. Like all BOY injection moulding machines, it is equipped with the high-end Procan ALPHA control. Intuitive, easy to use and highly precise are just some of the outstanding advantages of this multi-patented control from BOY.

When you consider the interesting selection of machines, the latest servo-drive technology and the many interesting applications, BOY will surely provide many highlights during the Plast 2012.

Dr. Boy GmbH & Co. KG

Dr. Boy GmbH & Co. KG is one of the leading worldwide manufacturers of injection moulding machines with a clamping force below 1,000 kN. Its precision, compact design, and low cost/performance ratio characterize the BOY product line. With innovative concepts and solutions, time and again BOY sets new standards. Since the company was founded in 1968, nearly 40,000 injection moulding machines have been delivered on all five continents. The company, which is led by the proprietors, continues to put special emphasis on engineering performance and high-class "made in Germany" workmanship.

For further information visit www.dr-boy.de.

Press releases you might also be interested in

Subscribe for news

The subscribtion service of the PresseBox informs you about press information of a certain topic by your choice at a choosen time. Please enter your email address to receive the email with the press releases.

An error occurred!

Thank you! You will receive a confirmation email within a few minutes.

I want to subscribe to the gratis press mail and have read and accepted the conditions.