Cube Optics AG Releases First LAN WDM Channel (4 x 25 Gbps) ROSA for 100 Gbps Multi-lambda Transceivers
In an effort to cope with constantly increasing bandwidth in LAN, SAN and Metro networks, service providers are demanding higher speed optical interfaces.To meet this need for greater transmission rates, the IEEE 802.3ba Ethernet Task Force is currently in the process of establishing new standards for 40 Gbps and 100 Gbps fiber-optic transceivers. Current serial transport designs exploiting state-of-the-art electronics and optics are not cost effective at such high speeds even over relatively short distances. A lower cost approach optically multiplexes together 25 Gbps data streams to realize transmission with the desired 100 Gbps data throughput. The Cube Optics' approach integrates four PIN detectors and four corresponding laser diodes including the associated four channel miniature optical multiplexing function. Miniature multi-lambda TOSA and ROSA assemblies enable the commercial development of the next generation of highspeed pluggable transceiver market.
Cube Optics AG has demonstrated the first 100 Gbps ROSA incorporating an optical demultiplexer, integrated four PIN detectors and a quad Trans-Impedance Amplifier (TIA) receiving parallel optical LAN WDM signals each propagating at 25 Gbps over a single optical fiber.
The miniature size measuring only 15.2 x 12 x 6.5 mm and minimal power consumption of typically only 250mW per channel facilitates realization of the next generation of pluggable 100 Gbps transceivers. The ROSA features OMA sensitivities of well below -8.25dBm. The optical demultiplexer utilizes the 1295.56, 1300.05, 1304.58, 1309.14 nm channels of the LAN WDM IEEE grid. The core optical element comprising a compact directly-reflecting multiplexing architecture draws on Cube Optics' intellectual property and the company's fabrication expertise. The 100 Gbps LAN WDM ROSA will be on display at ECOC 2009 in Vienna. The stand-alone ROSA modules are currently available in demonstrations and assessment volumes and will be enter volume production in 2010. CUBO's is well on its way to complete the complement to the integrated to the receiver module: the Transmitter Optical SubAssemble or TOSA.
"The design, fabrication and assembly of the multi-lambda 100G ROSA was a challenge. We are very happy to have demonstrated with outstanding performance the application of our unique optical integration capabilities in addressing the next generation of fiber optic transceivers. Our 100G ROSA marks the 3rd product in CUBO's growing portfolio of high speed optical transceiver front-ends" commented Ingo Smaglinski, the Chief Technical Officer of Cube Optics.
HUBER+SUHNER Cube Optics AG
Cube Optics sells a family of ultra-compact optical components, modules and solutions tailored to the demands of the access network. The Company's innovative active/passive optical packaging platform enables it to provide outside plant Telcordia approved, bandwidth enhancing solutions at compelling price points. This ultra-compact packaging platform leverages advanced microinjection molding techniques and enables network operators to realize low-cost, high performance architectures for both large and small network deployments and legacy infrastructure upgrades. Cube Optics' products have been implemented in a wide variety of applications including local loop unbundling, HFC capacity upgrades, FTTX roll-outs as well as in equipment for the test and measurement of access networks. The Company is based in Mainz, Germany.