Arburg exhibits new vertical machine in Slovakia

Allrounder 275 V and representative of anniversary machine series in Nitra

Lossburg, (PresseBox) - From 22 to 25 Mai 2007, Arburg will present two Allrounders at the International Engineering Exhibition 2007 in Nitra, Slovakia. The large exhibition stand No. 35 in Hall M4, measuring 110 square meters, will provide the stage for a representative of the Golden Edition anniversary machine series, the Allrounder 570 C Golden Edition, and for the hydraulic, vertical Allrounder 275 V machine. With the larger of the two vertical Allrounders, Arburg will evidence its extensive expertise with regard to machines particularly suited to the encapsulation of inserts.

Jaroslav Novak, Arburg Subsidiary Manager in the Czech Republic and responsible for the exhibition stand in Nitra, underscored the significance of this trade fair in Slovakia, "The International Engineering Exhibition in Nitra has always been an important event. For the Czech Arburg Subsidiary and the Slovakian office, it is without doubt one of the market highlights of the year 2007."

Vertical Allrounder 275 V With the hydraulic, vertical Allrounder 275 V, Arburg has introduced a second vertical machine with a free-space design clamping unit on the market. The new machine features generously dimensioned mould mounting platens, a maximum clamping force of 250 kN, and can be equipped with size 70 and 100 injection units. The Allrounder 275 V exhibited in Nitra has a clamping force of 250 kN, a size 100 clamping unit and is equipped with a demonstration mould which impressively shows the achievable degrees of freedom.

Compact dimensions With the low table heights of 800 millimetres on the 175 V and 900 millimetres on the 275 V, these Allrounders are extremely well suited for manual insertion and removal of moulded parts. Rotary and sliding tables available as optional features for the machines enable the encapsulation process to be automated and consequently reduce removal and insertion times to a minimum.

The Allrounder V machines are designed as free-space systems with integrated C-clamps and therefore feature considerable degrees of freedom around the mould. In conjunction with their small footprint, the machines are suitable without restrictions for integration into the production process and a variety of automation tasks. Their use is extremely flexible through the options of either injecting centrally or in the parting line. The height of the parting line can be varied slightly using a lifting device.

Golden Edition exhibit Furthermore, an Allrounder 570 C Golden Edition will be presented at the International Engineering Exhibition in Nitra, with a distance between tie bars of 570 millimetres, a clamping force of 2000 kN and a size 800 injection unit. With the Allrounder 570 C Golden Edition, moulded part weights from 30 to 434 g PS can be achieved. In Nitra, a CD tray will be produced on the anniversary machine. Material preparation and feed will be performed by a connected Thermolift 100-2 from Arburg.

Press releases you might also be interested in

Subscribe for news

The subscribtion service of the PresseBox informs you about press information of a certain topic by your choice at a choosen time. Please enter your email address to receive the email with the press releases.

An error occurred!

Thank you! You will receive a confirmation email within a few minutes.


I want to subscribe to the gratis press mail and have read and accepted the conditions.