拥有 3 万小时工作时间和最佳可视性的激光二极管
LAP 的线激光和激光投影仪上均搭载二极管集成技术,采用的二极管经久耐用,这将为有意进行系统转换或开展新投资的轮胎制造商带来效益。激光二极管的使用寿命比传统的 DPSS 激光模组多出三倍。LAP 的长期测试证实二极管的工作时间可达 3 万小时。对客户来说,这意味着生产可靠性更高和投资更安全。运营成本也随之降低。尤其使用绿光二极管还有另一大好处——投射的激光线束具备极佳的可见度。激光二极管深绿色色调非常容易识别,特别是在轮胎橡胶层这样的深色表面上。
配备各种接口,集成更具灵活性
SERVOLASER tireXpert 不仅配备 EtherNet/IP、PROFIBUS 和 PROFINET 接口,还支持市场上使用范围最广泛的通信标准。通过标准接口使用 PLC(可编程逻辑控制器),能够轻松连接并控制移动定位系统。可定制更多接口。得益于这种多连通特性,SERVOLASER tireXpert 几乎能够使用市面上所有的 PLC 系统(例如罗克韦尔自动化公司的 Allen-Bradley ControlLogix 控制器、西门子 SIMATIC S7 或者博世力士乐 IndraLogic)。LAP 的产品连接电机控制器后,能为用户提供最大程度的灵活性,从而在生产中实现无缝集成。
为轮胎制造商提供长久安全和高性价比的解决方案
SERVOLASER tireXpert 可直观地检查橡胶层在轮胎成型鼓上的贴合程度,多年来都是轮胎生产领域的质量保证标准。“SERVOLASER tireXpert 系统在全球领先的轮胎制造商处都得到成功应用,已经完全集成到轮胎成型电机中。然而,许多客户正面临更换电机控制器的境况。LAP 为响应这一需求,提供了不同接口”,LAP 公司 SERVOLASER Xpert 销售经理 Caren Lüdemann 解释道。无需额外的软硬件,既保持系统的简单性,又节约成本。“我公司提供最先进的系统,能够为现在和将来想要采用新系统的新老客户提供最好的帮助。”
精准、集成、多元 — 满足所有要求
SERVOLASER tireXpert 满足轮胎成型领域所有客户的不同要求:通过 PLC 可将运动的不同位置和序列编程为单独工作步骤。即便是投射的激光线束亮度和运动速度都可以单独设置。此外,还有高达 2.60 米的移动范围,即使是非公路用轮胎也适用,投影精度达 +/- 0.2 毫米。“LAP 激光系统令人信服之处不仅仅在有着经 LAP 验证的投影精度和多样性。它还支持全球最常见的现场总线标准,是轮胎成型领域首选的解决方案,”市场销售和产品管理负责人 Ralf Müller-Polyzou 说道。
独立机构测试 — 技术白皮书提供帮助
为能向用户提供 SERVOLASER Xpert 和 PLC 连接方面的帮助,LAP 还与连通领域独立编程专家开展合作。此外,LAP 还与研究机构一道编制技术白皮书。这些都为定位系统的调试和编程提供了实际帮助。