The SOLVIA product line is comprised of five new inverters with a nominal output power ranging from two to five kilowatts. The models SOLIVIA 2.0, 2.5, 3.0, 3.3 and 5.0 EU G3 are suitable for all commonly used solar modules – also for thin-film and rear-side contact PV modules – as manufacturers require the PV generator to be grounded at the positive or negative pole. Commencing in May 2010, the Solar Inverter SI product line will be substituted with the new SOLIVIA third generation European models from Delta.
The Solar Inverters are designed for use in eight countries (DE, FR, ES, IT, PT, GR, CZ, BE) and each unit is configurable via the display for the respective country. Besides the integrated country-aligned software further improvements were realized. The efficiency and temperature ranges are improved. So the models SOLIVIA 2.5, SOLIVIA 3.0 and SOLIVIA 3.3 have a maximum efficiency of 96% and operate with a maximum output power up to 57°C. That ensures high yields even for installations in warmer climates. Highly efficient and reliable, with its intelligent MPP tracking, the solar inverters get maximum performance from the solar modules under all operating conditions. Additionally, these models have an integrated DC disconnector that leads to reduced installation efforts and expenses. The usability is improved due to the new display that is brighter, offers a wider viewing angle and consumes less power.
All solar inverters have a lightweight, compact design and are very easy to install by using the provided unique mounting bracket. Wires and cables are connected externally without any need to open the enclosure. Since the IP65 casing is dust-tight, completely safe to touch and protected against jet water from any direction the models are suitable for indoor and outdoor applications. The inverters are compatible with the monitoring products from Meteocontrol that allows the user to monitor and to record all the different measurement values.
The Solar Inverters are designed for use in eight countries (DE, FR, ES, IT, PT, GR, CZ, BE) and each unit is configurable via the display for the respective country. Besides the integrated country-aligned software further improvements were realized. The efficiency and temperature ranges are improved. So the models SOLIVIA 2.5, SOLIVIA 3.0 and SOLIVIA 3.3 have a maximum efficiency of 96% and operate with a maximum output power up to 57°C. That ensures high yields even for installations in warmer climates. Highly efficient and reliable, with its intelligent MPP tracking, the solar inverters get maximum performance from the solar modules under all operating conditions. Additionally, these models have an integrated DC disconnector that leads to reduced installation efforts and expenses. The usability is improved due to the new display that is brighter, offers a wider viewing angle and consumes less power.
All solar inverters have a lightweight, compact design and are very easy to install by using the provided unique mounting bracket. Wires and cables are connected externally without any need to open the enclosure. Since the IP65 casing is dust-tight, completely safe to touch and protected against jet water from any direction the models are suitable for indoor and outdoor applications. The inverters are compatible with the monitoring products from Meteocontrol that allows the user to monitor and to record all the different measurement values.
