+++ 821.144 Press releases +++ 33.966 Newsrooms +++ 6.000 Media +++

Senvion unveils turbine with 3.6 megawatt power upgrade for sites with medium wind speeds

(PresseBox) (Hamburg, ) Senvion, a leading global manufacturer of wind turbines, presents the Senvion 3.6M140, a new variant suitable for sites with medium wind speeds. Compared to the Senvion 3.2M122, the energy yield at wind speeds of 7.5 m/s is increased by up to 20 per cent. Senvion optimizes the aeroacoustics by equipping the blades with serrations for lower sound in all operating modes.

Jürgen Geissinger, CEO at Senvion, says: "The Senvion 3.6M140 is based on the EBC platform, which utilizes the innovative Eco Blade Control technology. The intelligent load management technology enables an optimized load during operation in even more challenging wind regimes. By extending our product portfolio with this new variant, Senvion is taking another step towards tailor-made solutions for our customers. The upgrade to medium wind speed sites will open additional sites where our customer can apply this top of the line technology product. The140 meter rotor diameter and the upgrade to 3.6 megawatts will allow additional output at the same site."

The design of the Senvion 3.6M140 allows quick installation due to single blade installation and an easy to install design. Its blades are produced with the innovative RodPack technology which allows optimized and lighter blade design as well as faster and high-quality blade production.

Bernhard Telgmann, Executive Vice President Product & Technology at Senvion, adds: "The cost-efficiency of wind energy significantly depends on two main variables: The yield and design lifetime of a turbine. That's why compared to its predecessor we increased the yield by more than 20 percent while extending the life time by 25 percent - from 20 to 25 years. Furthermore, the Senvion 3.6M140 features Senvion's Next Electrical System with a power upgrade to 3.6 megawatt."

In 2016, six years after introducing the first 3.XM turbine to the market, Senvion has a track record of 765 Senvion 3.XM wind energy turbines and amounts to 2.5 GW installed of this product type alone.

Senvion at Hamburg WindEnergy 2016: Hall A4, Stand 410

About Senvion SE

Senvion is a leading global manufacturer of onshore and offshore wind turbines. The company develops, produces and markets wind turbines for almost any location - with rated outputs of 2 MW to 6.15 MW and rotor diameters of 82 metres to 152 metres. Furthermore, the company offers its customers project specific solutions in the areas of turnkey, service and maintenance, transport and installation, as well as foundation planning and construction. The systems are designed at the Senvion TechCenter in Osterrönfeld and manufactured at its German plants in Husum (North Friesland), Trampe (Brandenburg) and Bremerhaven, as well as Portugal. With approximately 3,900 employees worldwide, the company makes use of the experience gained from the manufacture and installation of more than 6,600 wind turbines around the world. The company's operational subsidiary Senvion GmbH is based in Hamburg and represented by distribution partners, subsidiaries and participations in European markets such as France, Belgium, the Netherlands, the UK, Italy, Romania, Portugal, Sweden, and Poland as well as on a global level in the USA, China, Australia, Japan, India and Canada. Senvion S.A. is listed on the Prime Standard of the Frankfurt Stock Exchange.

Press releases you might also be interested in

Subscribe for news

The subscribtion service of the PresseBox informs you about press information of a certain topic by your choice at a choosen time. Please enter your email address to receive the email with the press releases.

An error occurred!

Thank you! You will receive a confirmation email within a few minutes.